AdiNexus V2.0 Elite
AdiNexus V2.0 Elite
mason
Views 1447

Comments 0
Hardwired TCP/IP Ethernet controller chip with an SPI interface.
1,618 projects, page 3 of 68
AdiNexus V2.0 Elite
AdiNexus V2.0 Elite
masonViews 1447
Comments 0
warp-core: A Hybrid Rocket Launch Controller Built on an 8-bit AVR and the W5500
warp-core
scottViews 187
Comments 0
Apollo Automation's $34.99 CAST-1 turns powered speakers into Music Assistant players; an optional W5500 HAT moves the stream to Ethernet with Wi-Fi fallback.
How Does Apollo CAST-1 Use a W5500 Ethernet HAT for Wired Sendspin Multi-Room Audio?
ElenaLeeViews 179
Comments 0
Reverse-engineered BLE bridge: an ESP32-S3 reads pool pH and sets salt production on Sterilor XP units, and a W5500 sends it to Home Assistant over Ethernet.
How Does an ESP32-S3 and W5500 Bridge a Sterilor XP Pool Chlorinator to Home Assistant over BLE?
ElenaLeeViews 240
Comments 0
TALLY-NODE connects video switchers through W5500 Ethernet, then sends camera tally states to LoRa receivers. The paid kit is available by inquiry.
How Does TALLY-NODE Use W5500 Ethernet and LoRa for Camera Tally Lights?
BenjaminViews 115
Comments 0
CO16 links 16 analog inputs, four multiplexed PT100 probes and relay control to Home Assistant through W5500 Ethernet and configurable firmware.
How Does KinCony CO16 Connect Analog Sensors to Home Assistant with W5500?
BenjaminViews 137
Comments 0
SLZB-Ultima connects dual smart-home radios through W5500 Ethernet, with distinct SLZB-OS and ESPHome setup paths and optional PoE expansion.
How Does W5500 Connect the SMLIGHT SLZB-Ultima Smart-Home Hub to Ethernet?
BenjaminViews 128
Comments 0
ESP32 PoE Home Assistant Speaker
Esp32-Poe-HA-Speaker
jadenViews 138
Comments 0
Bluetooth Proxy Gateway
BP2-POE
jadenViews 583
Comments 0
STM32F407 gateway using WIZnet W5500 for Modbus-to-MQTT monitoring, offline data buffering, OTA rollback, and automatic 4G failover.
stm32f407-iot-gateway
lawrenceViews 177
Comments 0
EnergyMe Home Pro: An Ethernet-First Smart Energy Monitor Built with ESP32-S3 and W5500
EnergyMe Home Pro: An Ethernet-First Smart Energy Monitor Built with ESP32-S3 and W5500
Aimee0Views 146
Comments 0
Industrial Modbus gateway: STM32F103 + FreeRTOS firmware (Modbus RTU<->TCP, W5500, OTA with dual-partition bootloader) and a Linux host
modbus-gateway
lawrenceViews 218
Comments 0
Modular RP2350 live-sound controller with W5500 Ethernet, motorized faders and display modules, built to prototype the Virgil audio-control protocol.
Can an Open Network Protocol Fix Live Audio Control? Proteus, Virgil and W5500
irinaViews 70
Comments 0
ESP32-S3 network diagnostics device: W5500 SPI Ethernet with DHCP/static IP, ping and subnet scan, plus Wi-Fi and BLE scanning on an ILI9341 UI.
Cranet: ESP32-S3 Network Diagnostics Handheld with W5500 Wired Ethernet, Wi-Fi and BLE
josephsrViews 121
Comments 0
Unified Arduino drivers for CAN, CAN FD, RS-485, Modbus and W5500 Ethernet, with diagnostics, DHCP, sockets and portable no-heap design.
NiusBus: One Arduino Library for CAN, RS-485, Modbus and W5500 Ethernet
irinaViews 99
Comments 0
LuckFox-PicoMini-ParkingVision is a distributed smart-parking system that combines LuckFox Pico Mini RV1103 edge-AI boards with ESP32-S3
How to Build Distributed Smart Parking Vision with WIZnet W5500 on ESP32-S3 and LuckFox Pico Mini?
viktorViews 189
Comments 0
ezDV: How Soldering a W5500 onto a Wi-Fi FreeDV Device Added Wired Ethernet Without Touching the Radio Code
ezDV
scottViews 188
Comments 0
This PR integrates WIZnet's W5500 Ethernet controller into open-source Bitcoin miners, providing CPU-offloaded, ultra-low-latency wired connectivity.
Nerd Eth interposer support- #724 #724 Merged shufps merged 2 commits into shufps:develop from BitMa
gunnViews 135
Comments 0
A GPS/PPS-based Stratum-1 NTP server using ESP32-S3 and WIZnet W5500 Ethernet to distribute accurate time over a local network.
GPS Clock — Serveur NTP stratum-1 sur ESP32-S3 + matrice HUB75
sophiaViews 98
Comments 0
An ESP32-S3 robotics control system using WIZnet W5500 Ethernet and Modbus TCP to communicate with a Beckhoff PLC for motor control and telemetry.
NASA Lunabotics: Dual-Core RTOS Motor Control & Telemetry System
sophiaViews 110
Comments 0
SLB-EXT: Why a Closed-Loop CNC Controller Moved Its Drivers Off the Board but Kept W5500 Ethernet
SLB-EXT Closed-Loop Controller
scottViews 152
Comments 0
Jesse Hills turns an M5Stack CoreS3 and W5500 PoE base into a touchscreen tester for link, DHCP, IPv6 and ping, after fixing a shared SPI bus in ESPHome.
How Does a W5500 Network Toolbox Diagnose Ethernet from an M5Stack CoreS3?
BenjaminViews 162
Comments 0
An Isolated Thermocouple Reader
An Isolated Thermocouple Reader
masonViews 689
Comments 0
O-Nexus NetManager
O-Nexus NetManager
masonViews 87
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?