Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
Alan
Views 84

Comments 0
Hardwired TCP/IP Ethernet controller chip with an SPI interface.
1,545 projects, page 2 of 65
Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
AlanViews 84
Comments 0
An ESP-IDF firmware that turns an ESP32-WROOM32 with a W5500 into a deterministic industrial process simulator served over Modbus TCP on port 502.
IndustrialSimulator: ESP32-WROOM32 and W5500 Modbus TCP Process Simulator
josephsrViews 97
Comments 0
A sub-25 mm iSpindel alternative that broadcasts tilt over ESP-NOW to an ESP32 + WIZnet W5500 gateway, which relays readings to MQTT and Home Assistant.
weeSpindel: a 25 mm ESP-NOW hydrometer with a W5500 Ethernet gateway
josephsrViews 224
Comments 0
Looking for an embedded hardware engineer to review an ESP32 access-control schematic
Looking for an embedded hardware engineer to review an ESP32 access-control schematic
gunnViews 82
Comments 0
ESP32-S3 Commercial Access-Control Controller with W5500 Ethernet
Commercial ESP32-S3 Access-Control Controller with W5500
sophiaViews 80
Comments 0
WLED Controller Upgraded from LAN8720 to W5500 Ethernet
A1-SLWF-09U WLED Ethernet Controller
sophiaViews 83
Comments 0
PACE HMI: Connecting the RAMMP Robotic Wheelchair via RTPS with ESP32-P4 and W5500
PACE HMI: Connecting the RAMMP Robotic Wheelchair via RTPS with ESP32-P4 and W5500
Aimee0Views 83
Comments 0
The ERQOS EQSP32CE is an ESP32-S3-based industrial controller that combines I/O, RS232/RS485, CAN, Wi-Fi, BLE, and wired Ethernet in a DIN-rail PLC format
How to Build Industrial Ethernet with W5500 on the ERQOS EQSP32CE ESP32-S3 PLC?
viktorViews 97
Comments 0
This project implements a BLE sensor concentrator on the Nordic nRF52840 DK and adds a wired TCP uplink through a WIZnet W5500 connected over SPI
How to Add W5500 Ethernet to a Zephyr BLE Concentrator on nRF52840?
viktorViews 79
Comments 0
A MAC No Factory Ever Issued — How Six ESP32-S3 Boards Share One W5500 Address
ivan-bohun
scottViews 107
Comments 0
wireless-ac-automation-esp32
wireless-ac-automation-esp32
masonViews 95
Comments 0
ZoneTherm combines seven OpenTherm thermostats, configurable valve groups and W5500 Ethernet for local zone control and Home Assistant integration.
How Does ZoneTherm Use W5500 to Connect Seven OpenTherm Heating Zones?
BenjaminViews 93
Comments 0
An ESP32 thesis project uses W5500 Ethernet, a FreeRTOS queue and MQTT acknowledgements to explore electrical telemetry timing.
How Can an ESP32 and W5500 Separate Meter Polling from MQTT Telemetry?
BenjaminViews 167
Comments 0
Clock 2 combines GNSS timing, an ESP32-S3 and W5500 Ethernet to serve local NTP time, with PoE power, OLED status and browser diagnostics.
How Does Clock 2 Turn GNSS Pulses Into a W5500 Ethernet Time Server?
BenjaminViews 85
Comments 0
JimBoHa adds BACnet objects, priority-aware relay commands and authenticated Ethernet updates to a Waveshare ESP32-S3 controller with W5500.
How Can W5500 Give Eight Relays and Inputs a BACnet Management Interface?
BenjaminViews 95
Comments 0
8채널 네트워크 릴레이 모듈 IP/이더넷 액세스 컨트롤러 스위치, Modbus TCP 전송 지원
8채널 네트워크 릴레이 모듈 IP/이더넷 액세스 컨트롤러 스위치, Modbus TCP 전송 지원
masonViews 82
Comments 0
Jesse Hills turns a CoreS3 and W5500 PoE base into a touchscreen tester for Ethernet link, DHCP, IPv6 and ping, with fixes for a shared SPI bus.
How Does a W5500 Network Toolbox Diagnose Ethernet from an M5Stack CoreS3?
BenjaminViews 83
Comments 0
CANLAB combines isolated inputs, relays, analog sensing and PWM with USB HID and W5500 TCP access, plus C++ host code for Windows and Linux.
How Does CANLAB Bring the Same I/O Bank to USB and W5500 Ethernet Hosts?
BenjaminViews 96
Comments 0
HATRON pairs Arduino Micro-compatible 24 V control with an optional HT008 W5500 module, DIO8 expansion and a public conveyor example.
What Does the HATRON PLCino Gain from Its Optional W5500 Ethernet Module?
BenjaminViews 101
Comments 0
GEVA combines a SAMD21 touchscreen PLC, isolated I/O and optional W5500 Ethernet with public Arduino code and a dedicated guide for AI coding assistants.
Why Does the GEVINO TFT HMI Pair a Touchscreen with Optional W5500 Ethernet?
BenjaminViews 85
Comments 0
Industrial IP & 4G Smart Relay
Industrial IP & 4G Smart Relay
masonViews 79
Comments 0
Zephyr's in-tree W5500 driver is MACRAW only. This repo adds an out-of-tree socket-offload driver on the chip's hardware TCP/IP.
How Does a Zephyr Driver Use W5500 Hardware TCP/IP When the In-Tree One Is MACRAW Only?
Grace_KooViews 112
Comments 0
Four UDP echo builds on one NUCLEO-H723ZG, measured for an hour each: W5500 hardware offload against MACRAW and the STM32's own MAC.
How Much Does W5500 Hardware Offload Save Over MACRAW on the Same Board?
Grace_KooViews 105
Comments 0
https://github.com/christophebelmont/Flow.io-Waveshare
Flow.io-Waveshare
TheoImViews 126
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?