VAR

industrial access-control master

ESP32-WROOM-32E, W5500 Ethernet, and 5-Channel Relay Automation

Our LIN bus logger is a LIN bus is a more stable and low-cost alternative for CAN bus in automotives

IOT WARE's i1-5000 and i9-2000 are complementary HF/UHF RFID readers, not firmware versions; i9-2000 offers WIZ550S2E Ethernet (N) or WizFi360 Wi-Fi (W).

EGLTEC's SF-0204 is a fixed 4-port UHF RFID reader from Taiwan whose FCC operational description states that an STM32 MCU controls an Impinj R2000-based RFID.

PRIZM Gateway: 레거시 설비를 한 번에 스마트하게

A plug-in W5500 module turns GEVA Elettronica's EUR 74.80 SAMD21 stepper PLC into a networked controller with Modbus TCP, Telnet debug and FTP updates.

DTG.300 MEI là bộ Data Logger công nghiệp thông minh chuyên dùng cho giám sát lưu lượng, áp suất, mực nước và các tín hiệu cảm biến hiện trường.

Moduł wykonawczy smart home do rozdzielni elektrycznej. Odbiera sygnały z przycisków i czujników oraz steruje obwodami: oświetleniem, roletami, ogrzewaniem, bra

More than 1,000 lighting cabinets since 2021: the Smart Light Controller story

Customized nitrogen generators are ready for installation in greenhouses

ENGAM d.o.o. — ENGAM-MASTER (Ready Controller in Aluminium Enclosure)

DTU Shop's OpenDTU LAN-DTU brings Hoymiles inverter data to local web dashboards, MQTT, and smart homes over W5500 Ethernet, with an OLED display.

AUPINS AC-EDC connects EV chargers to OCPP management systems via W5500 Ethernet, Wi-Fi, or 4G. Explore its features, network options, and integration needs.

aux-2

AdiNexus V2.0 Elite

Spectranet uses WIZnet's W5100 hardwired TCP/IP chip to give the 1982 ZX Spectrum TCP/UDP sockets, network file systems and LAN firmware updates.

Semnox's Radian Gateway links RFID wristbands in entertainment venues to the Parafait server, using a WIZnet serial-to-Ethernet (S2E) module for its LAN connect

The RFENGINE HFR-4AM and HFR-2AM are industrial HF RFID readers that handle both 13.56MHz RFID reader control and Ethernet communication using a single W7100A c

Connect any CAN device and record the decoded CAN frames in a non-volatile memory!

Connect any CAN bus enabled device and record the raw CAN frames in a non-volatile memory!

Our CAN to Wi-Fi Adapter is designed to provide seamless wireless connectivity for CAN bus–based systems.

Apollo Automation's $34.99 CAST-1 turns powered speakers into Music Assistant players; an optional W5500 HAT moves the stream to Ethernet with Wi-Fi fallback.

TALLY-NODE connects video switchers through W5500 Ethernet, then sends camera tally states to LoRa receivers. The paid kit is available by inquiry.