This project uses an STM32 microcontroller with the WIZnet W5500 to provide wired 10/100 Ethernet connectivity through SPI.
How to Build a PROFINET-Oriented STM32 Ethernet Device with W5500?
mark
Views 49

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,463 projects
This project uses an STM32 microcontroller with the WIZnet W5500 to provide wired 10/100 Ethernet connectivity through SPI.
How to Build a PROFINET-Oriented STM32 Ethernet Device with W5500?
markViews 49
Comments 0
Inside pw-esp-bacnet-proxy, an open-source project that connects existing Delta heating and cooling controls to a locally managed smart home.
Bringing BACnet HVAC Into Home Assistant With an ESP32
viktorViews 57
Comments 0
UnreaLin01's mlx90640-rp2350-stream reads an MLX90640 thermal array on a WIZnet W6300-EVB-Pico2 and ships raw sensor data to a PC over USB or UDP.
mlx90640-rp2350-stream
TheoImViews 453
Comments 0
solis-shelly-sdm630-bridge
solis-shelly-sdm630-bridge
masonViews 202
Comments 0
Freshtrack
Freshtrack
masonViews 143
Comments 0
A Paderborn University lab BMS runs a Modbus TCP server on a W5500 hardware socket, port 502, so a ROS 2 node reads cell data and publishes BatteryState.
How Does a W5500 Modbus TCP BMS Connect a Rescue Robot Battery to ROS 2?
gunnViews 133
Comments 0
Kontrx is a bare-metal STM32F407 + FreeRTOS industrial edge gateway for water-quality monitoring. It doesn't just "have Ethernet"
KONTRX Industrial Gateway
lawrenceViews 95
Comments 0
Bringing Legacy Sony RS-422 Camera Control onto Ethernet with W7500P
sony-camera-bridge
Lihan__Views 93
Comments 0
Network MIDI 2.0 C++17 library — binary release (AmeNote Inc.)
NetworkMIDI2
Lihan__Views 92
Comments 0
This project uses a Raspberry Pi Pico and WIZnet W5500 to extend a Flight Controller’s MAVLink communication over Ethernet.
MAVLink Ethernet Bridge with WIZnet W5500 (raspberry-pi-pico-w5500-mavlink-bridge)
lawrenceViews 100
Comments 0
an UniFLEX compatible hardware/software project on Eurocards
UniFLEX
jadenViews 128
Comments 0
A Chinese supercomputing institute's network data encryption card routes its protocol communication through the W5500's hardwired TCP/IP stack.
Hardware TCP/IP Stack in a Network Encryption Card
jadenViews 97
Comments 0
Custom RP2354B computer runs its own OS and drives WIZnet W5100S directly over SPI, implementing hardware sockets, blocking I/O, and a TCP server.
Driving WIZnet W5100S Without an SDK on a Custom RP2354B
irinaViews 102
Comments 0
Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
Building an LTE-to-Ethernet Gateway with nRF9160 and W5500
AlanViews 87
Comments 0
AirObserver, A PoE Powered Indoor Air Quality Sensor Node
AirObserver, A PoE Powered Indoor Air Quality Sensor Node
AlanViews 97
Comments 0
Brewing firmware with a stm8s207 uC.
Home-Brewery Automation
Sunny_Views 142
Comments 0
LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities
CA2RXU LoRa APRS iGate/Digipeater
Sunny_Views 146
Comments 0
Secure physical inbox platform for sending semantic print jobs to connected thermal printers.
Paperbridge
Sunny_Views 302
Comments 0
Projects I’ve built, contributed to, am currently building, or worked on over the years - personal, professional, and everything in between.
nRF52840 Capacitance meter
AlanViews 273
Comments 0
Cloud-free smart meter tracker using ESP32-C3 and optional W5500 Ethernet, with Wi-Fi fallback and local APIs for Home Assistant, MQTT, and more.
IR Tracker Offline: Cloud-Free Smart Meter Monitoring with ESP32-C3 and W5500
irinaViews 89
Comments 0
An ESP-IDF firmware that turns an ESP32-WROOM32 with a W5500 into a deterministic industrial process simulator served over Modbus TCP on port 502.
IndustrialSimulator: ESP32-WROOM32 and W5500 Modbus TCP Process Simulator
josephsrViews 100
Comments 0
A sub-25 mm iSpindel alternative that broadcasts tilt over ESP-NOW to an ESP32 + WIZnet W5500 gateway, which relays readings to MQTT and Home Assistant.
weeSpindel: a 25 mm ESP-NOW hydrometer with a W5500 Ethernet gateway
josephsrViews 226
Comments 0
Looking for an embedded hardware engineer to review an ESP32 access-control schematic
Looking for an embedded hardware engineer to review an ESP32 access-control schematic
gunnViews 87
Comments 0
Regarding ESP32 Ethernet Design
Regarding ESP32 Ethernet Design
gunnViews 89
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?