rio-octobot

8Axis LinuxCNC-RIO main-board - for the iceWerx iCE40-HX8K FPGA-Devboard - kicad project

viktor

Published August 19, 2024

168 UCC

20 WCC

42 VAR

Original author: Oliver DippelOriginal source (new tab)

Components

Hardware components

WIZnet - W5500

x 1

WIZnet parts

W5500 Datasheet

Project description

8Axis LinuxCNC-RIO main-board - for the iceWerx iCE40-HX8K FPGA-Devboard - kicad project

experimental - not fully tested yet

software / gateware

https://github.com/multigcs/riocore

BOM

https://eu.robotshop.com/de/products/devantech-icewerx-ice40-hx8k-fpga

https://www.amazon.de/WT32-ETH01-Embedded-Schnittstelle-Bluetooth-Entwicklungsplatine/dp/B0CW3DDWZ4

Forum

German: https://www.cnc-aus-holz.at/index.php?thread/3130-experimente-mit-linux-cnc-auf-raspi-und-ice40-fpga-als-mesa-alternative/&postID=40335#post40335 English: https://forum.linuxcnc.org/18-computer/49142-linuxcnc-rio-realtimeio-for-linuxcnc-based-on-fpga-ice40-ecp5

Comments

Similar projects you might like

SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.

SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English

sophia

Views 38
Comments 0

ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.

W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems

jakelee

Views 163
Comments 0

modular USB-to-Ethernet bridge that makes your USB smart-home radios available across your LAN or Wi-Fi

How to Connect USB Smart-Home Radios with W5500 on the SMLIGHT SLZB-U2L?

viktor

Views 55
Comments 0

SuperLongBoard: Why a CNC Shop Tired of EMI Chose W5500 Ethernet Over USB

SuperLongBoard

scott

Views 74
Comments 0

ZenoLAN0505: A Vietnamese Modbus RTU ⇄ TCP DIN-Rail Gateway Built on ESP32 and W5500

IP Ethernet Wifi ZenoLAN0505

scott

Views 100
Comments 0

DIN-rail ESP32-S3 controller: 16 digital inputs and 16 MOSFET outputs, WIZnet W5500 wired Ethernet, RS485, and Home Assistant/ESPHome support.

KinCony KC868-A16v3: 16-Channel ESP32-S3 I/O Controller with WIZnet W5500 Ethernet

ElenaLee

Views 79
Comments 0

This project uses a Raspberry Pi Pico and WIZnet W5500 to extend a Flight Controller’s MAVLink communication over Ethernet.

MAVLink Ethernet Bridge with WIZnet W5500 (raspberry-pi-pico-w5500-mavlink-bridge)

lawrence

Views 99
Comments 0

Comments