sensor-station by Paul B. (Firebolt) is Ethernet-first ESP32 firmware for occupancy and people-counting systems.
Mutual-TLS MQTT, Verified OTA and Device Identity on an ESP32-S3 with the WIZnet W5500
November 05, 2026
Views 216

Comments 0
sensor-station by Paul B. (Firebolt) is Ethernet-first ESP32 firmware for occupancy and people-counting systems.
Mutual-TLS MQTT, Verified OTA and Device Identity on an ESP32-S3 with the WIZnet W5500
November 05, 2026Views 216
Comments 0
Zephyr-Ethernet-Stress-Test is a small, focused tool: it pushes the W5500 driver with realistic concurrent traffic and records exactly where it fails
Hardening Zephyr's W5500 Driver: An Open-Source Ethernet Stress Test
October 22, 2026Views 85
Comments 0
Hypervision PLC is an open-source project by Jan Green Larsen that turns an ESP32 into a network-connected programmable logic controller
Hypervision PLC: An Open-Source ESP32 PLC with Wired Ethernet via the WIZnet W5500
September 21, 2026Views 184
Comments 0
The Forlinx OKMX9352-C already has two native Gigabit Ethernet ports, so adding a WIZnet W5500 is not about compensating for insufficient processing power
How to Add a Third Ethernet Interface with W5500 on the Forlinx OKMX9352-C?
September 14, 2026Views 69
Comments 0
LuckFox-PicoMini-ParkingVision is a distributed smart-parking system that combines LuckFox Pico Mini RV1103 edge-AI boards with ESP32-S3
How to Build Distributed Smart Parking Vision with WIZnet W5500 on ESP32-S3 and LuckFox Pico Mini?
September 04, 2026Views 176
Comments 0
Inside pw-esp-bacnet-proxy, an open-source project that connects existing Delta heating and cooling controls to a locally managed smart home.
Bringing BACnet HVAC Into Home Assistant With an ESP32
September 04, 2026Views 129
Comments 0
Summary Power Manifold is a six-port managed USB-C Power Delivery supply built around an RP2350 , independent charger blades, and a WIZnet W6100
How to Build a Managed USB-C Power Controller with WIZnet W6100 on RP2350?
September 02, 2026Views 114
Comments 0
This project implements a BLE sensor concentrator on the Nordic nRF52840 DK and adds a wired TCP uplink through a WIZnet W5500 connected over SPI
How to Add W5500 Ethernet to a Zephyr BLE Concentrator on nRF52840?
August 21, 2026Views 143
Comments 0
AmeNote ProtoZOA's NetworkMIDI2_Bridge connects USB MIDI 2.0 devices to Network MIDI 2.0 over wired Ethernet using an RP2040 and a WIZnet W5500 expansion board.
How to Bridge Network MIDI 2.0 with W5500 on RP2040?
August 21, 2026Views 195
Comments 0
PIXPAPER-213-C is a 2.13-inch, four-color electronic paper display that can be driven from the WIZnet W6300-EVB-Pico2 under Zephyr RTOS
How to Drive a PIXPAPER-213-C Display on W6300-EVB-Pico2 with Zephyr?
August 21, 2026Views 159
Comments 0
PICOTTY turns Raspberry Pi Pico or Pico 2 boards into networked serial-console nodes for headless computers.
How to Build a Networked Serial Console with WIZnet W5100S on Raspberry Pi Pico?
August 04, 2026Views 193
Comments 0
Signal Elektronik’s Geiger-Müller counter and datalogger uses the WIZnet W55RP20-EVB-PICO as the processing and wired-networking platform for a radiation-monito
How to Build an Industrial Geiger-Müller Datalogger with W55RP20-EVB-PICO?
August 03, 2026Views 232
Comments 0
MeshCam is an ESP32-based wildlife camera network that transfers motion-triggered images
How to Integrate W5500 Ethernet into MeshCam Gateway Firmware?
July 28, 2026Views 225
Comments 0
This project replaces a Raspberry Pi 3B running Pi-hole with a compact DNS sinkhole built from a Seeed Studio XIAO ESP32-S3 and a WIZnet WIZ850io
How to Build a Tiny DNS Sinkhole with W5500 on XIAO ESP32-S3?
July 22, 2026Views 311
Comments 0
muc-plc is an experimental PLC runtime that moves industrial control execution onto embedded microcontrollers
Modular UDP-based Controller - PLC runtime for embedded MCUs
July 13, 2026Views 224
Comments 0
The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems
How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?
July 13, 2026Views 293
Comments 0
Analog Devices no-OS is a bare-metal embedded software framework for running ADI device drivers
How to Add TCP/UDP Ethernet with W5500 on Analog Devices no-OS?
July 07, 2026Views 268
Comments 0
This ESP32-S3 project exposes a USB-hosted serial device through a browser-based HTTP/WebSocket terminal and uses the WIZnet W5500
How to Build a Reliable USB Serial Web Bridge with W5500 on ESP32-S3?
July 01, 2026Views 393
Comments 0
The dephy project by judadao is a reusable board-profile and Zephyr workspace management module for ESP32-based IoT products
dephy: A Reusable ESP32 Board-Platform Module for Zephyr-Based IoT Products
July 01, 2026Views 192
Comments 1
open-source ESPHome configuration project that turns a Waveshare ESP32-S3-POE-ETH-8DI-8RO into a capable, production-ready Home Energy Management controller
Smart Home Energy Management Controller with the Waveshare ESP32-S3-POE-ETH
July 01, 2026Views 462
Comments 1
ZapTrace and the WIZnet W5500: AI-Native PCB Design with First-Class Ethernet Support
ZapTrace and the WIZnet W5500: AI-Native PCB Design with First-Class Ethernet Support
June 19, 2026Views 270
Comments 0
Eyes in the Sky: Building a 24/7 Aerostat Sensor Hub with Arduino Mega, ESP32, and WIZnet W5500
Eyes in the Sky: Building a 24/7 Aerostat Sensor Hub with Arduino Mega, ESP32, and WIZnet W5500
June 19, 2026Views 268
Comments 0
BetterFrame ioBOX: A PoE-Powered ESP32-S3 + WIZnet W5500 IO Controller for Smart Display Systems
BetterFrame ioBOX: A PoE-Powered ESP32-S3 + WIZnet W5500 IO Controller for Smart Display Systems
June 11, 2026Views 420
Comments 0
RP2350 + W5500 + USB-NCM Reusable Snippets
RP2350 + W5500 + USB-NCM Reusable Snippets
June 02, 2026Views 351
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?