Skip to content

Wiring the WIZNET W5100/W5500 as Network Time Protocol Client with Microcontroller

Wiring the WIZNET W5100/W5500 as Network Time Protocol Client with Microcontroller

gavinchang

Published January 02, 2024

Original author: NCOriginal source (new tab)

Wiring the WIZNET W5100/W5500 as Network Time Protocol Client with Microcontroller

Components

Hardware components

WIZnet parts

Project description

NTP (Network Time Protocol) is a networking protocol for clock synchronization between computer over packet switches, variable-latency data networks. NTP is one of the oldest IP in current used, this technology was designed by David Mills at the University of Delaware. NTP is intended to synchronize all participating computers within milliseconds of coordinated UTC (Universal Time Coordinated) it uses the intersection algorithm to select accurate time servers mitigated the effect of variable network latency. For more reading please refer to this link. On this illustration guide we will going…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like