Gavin

A resource-constrained microcontroller can use the WIZnet W5500 for wired TCP/IP communication while keeping sensitive records encrypted in external storage.

This project connects an STM32H750 to a WIZnet W5500 to implement an Ethernet TCP server with automatic IP configuration.

This educational design describes an Altera FPGA controlling a WIZnet W5500 over SPI for multi-socket UDP communication.

This repository provides a schematic PDF for connecting an STM32F103 microcontroller to a WIZnet W5500 Ethernet controller.

This project combines an STM32F103C8T6, WIZnet W5500, and an MQTT client to publish and subscribe to messages through Alibaba Cloud IoT.

This Industrial IoT project uses Verilog FPGA logic to control a WIZnet W5500 through an 80 MHz SPI interface.

This education and maker project uses WIZnet W5500 on an STM32 platform to build wired Ethernet communication with NTP-based RTC time synchronization.

This education and maker-oriented project uses WIZnet W5500 with STM32F103RET6 and FreeRTOS to build a wired Ethernet MQTT node.

This article explains a firmware-oriented Industrial IoT Ethernet design using the WIZnet W5500 as a TCP server with keepalive handling.

This article explains an education-oriented WIZnet W5500 Ethernet project with a focus on registers.

This commercial prototype architecture adds wired Ethernet to an ESP32 MicroPython device using WIZnet W5500 as the Ethernet controller.

This education-focused project explains how MicroPython MCU boards can use WIZnet W5500 to learn wired Ethernet through real register-level behavior.

This commercial prototype architecture uses an ESP32 running MicroPython with a WIZnet W5500 Ethernet module to add wired TCP/IP networking through SPI.

This robotics architecture describes how a MicroPython-based robot node can use WIZnet W5500 as a wired Ethernet controller for deterministic bench, field, and

This maker-oriented project explores using WIZnet W5500 not in its usual hardware-socket mode, but as a MAC/PHY-style Ethernet interface for LwIP running on a F

This robotics and maker project describes a 2021 electronic-design competition camera measurement system built with a Raspberry Pi central terminal and two K210

This AI8051U commercial embedded project uses WIZnet W5500 to implement a Modbus TCP slave over wired Ethernet.

This STC32G12K128 project uses the WIZnet W5500 Ethernet controller to obtain an IP address automatically through DHCP.

This STM32F10x education project demonstrates UDP multicast using the WIZnet W5500 Ethernet controller and WIZnet ioLibrary.

This article explains how embedded systems use the WIZnet W5500 Ethernet controller to communicate with MQTT-based IoT cloud platforms.

This article explains how an embedded system integrates W5500 Ethernet with an MCU and external smart module to communicate with an MQTT IoT cloud.

This project demonstrates how to build a local smart home voice assistant using the XiaoZhi AI system with a WIZnet W5500 Ethernet controller.

This project explains how to connect a XiaoZhi AI-based embedded device to a local server using the WIZnet W5500 Ethernet controller.

This source is not a board-specific application project. It is a high-level guide built around WIZnet’s ioLibrary family,