wiz_chandana

A configurable bridge for wireless sensors and controllers using WIZnet 5500io Ethernet module and Xively

Big Alphanumeric Display Board – A pile of ultra-bright palm-sized 16-segment alphanumeric displays with network-based control

The W5100S-EVB-Pico, is a board made by Wiznet. This board is built upon the Raspberry Pi Pico but adds a full-Size Ethernet Port.

A fairly simple adapter for the WIZ830MJ to connect it to the RC2014 bus.

4.2" ePaper display with Raspberry Pico and WiFi using MicroPython

Send sensors data and display it on the web server using WIZnet W5500 ethernet module using stm32 f103 development board.

Develop a mean of replicable linear concrete (cement) component manipulation utilizing robotically-controlled, flexible fabric formworks.

Real-time & refresh-less data acquisition by ajax technique. Arduino + Ethernet Shield + DS18B20 + PHP and AJAX

Build a $5 web-based power meter and break open our usage to those with solutions to our antiquated grid and lifestyles.

Make a web server for displaying sensor data using W5500 and Mongoose. the hardware part is composed of the N32G457 main control board.

Smart Medication Management System with Alarm for Reminder

WizFiBuddy is a tiny office assistance hardware that utilizes WizFi360.

Predict rain based on atmospheric pressure, Altitude, and temperature along with the help of rain sensors to notify the user.

web remote control for my Air Condition (A/C)

The installation saw the WizYasep's first deployment .

This design is able to talk wirelessly with radios attached to each end node and the base station.

Arduino nrf51822 w5500 - Blynk + MySensors gateway + majordomo + radio node = sending data in all directions

In this project, we will assemble a smart greenhouse controlled via the Internet using W5500 chip and the iocontrol.ru service.

This video goes over receiving and processing MQTT messages with Raspberry Pi Pico and WizNet W5500.

This video goes over sending data from a sensor over MQTT with Raspberry Pi Pico and WizNet W5500.

Setup process of Raspberry Pi Pico with WizNet W5500 and sending a MQTT message.

stm32 internet radio i.e WIZNET W5500 + VS1053 internet radio Project

Project to monitor temperature and humidity using STM32f103 and W5500

Sending text and voice messages through dedicated units connected to the internet using AVR MCU and Wiznet as shown in the video.