IOT Gateway as a bridge for wireless sensors using WIZnet 5500io Ethernet module and Xively
A configurable bridge for wireless sensors and controllers using WIZnet 5500io Ethernet module and Xively
3
Components
Hardware components
Arduino - Arduino UNO
x 1
WIZnet - W5500-io
x 1
Project description
This is a device to allow multiple wireless sensors and controllers to connect to the internet. This will be a configurable bridge to make the addition of new devices easy. This will be combined with a raspberry pi to serve a website interface. Details : The IOT Gateway Acts as a bridge for wireless sensors to send their data to the internet and allows outputs to be controlled by another web connected device. The Gateway will listen for data from each sensor node in the system and send the data to the appropriate Xively channel for use by another device. The Gateway will also listen for…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
