Setup process of Raspberry Pi Pico with WizNet W5500 and sending a MQTT message.
5
WIZnet - W5500
x 1
Raspberry Pi - Raspberry Pi Pico
x 1
Apollo Automation's $34.99 CAST-1 turns powered speakers into Music Assistant players; an optional W5500 HAT moves the stream to Ethernet with Wi-Fi fallback.
How Does Apollo CAST-1 Use a W5500 Ethernet HAT for Wired Sendspin Multi-Room Audio?
ElenaLee
Views 98
Comments 0
Reverse-engineered BLE bridge: an ESP32-S3 reads pool pH and sets salt production on Sterilor XP units, and a W5500 sends it to Home Assistant over Ethernet.
How Does an ESP32-S3 and W5500 Bridge a Sterilor XP Pool Chlorinator to Home Assistant over BLE?
ElenaLee
Views 197
Comments 0
TALLY-NODE connects video switchers through W5500 Ethernet, then sends camera tally states to LoRa receivers. The paid kit is available by inquiry.
How Does TALLY-NODE Use W5500 Ethernet and LoRa for Camera Tally Lights?
Benjamin
Views 71
Comments 0
CO16 links 16 analog inputs, four multiplexed PT100 probes and relay control to Home Assistant through W5500 Ethernet and configurable firmware.
How Does KinCony CO16 Connect Analog Sensors to Home Assistant with W5500?
Benjamin
Views 91
Comments 0
SLZB-Ultima connects dual smart-home radios through W5500 Ethernet, with distinct SLZB-OS and ESPHome setup paths and optional PoE expansion.
How Does W5500 Connect the SMLIGHT SLZB-Ultima Smart-Home Hub to Ethernet?
Benjamin
Views 88
Comments 0
STM32F407 gateway using WIZnet W5500 for Modbus-to-MQTT monitoring, offline data buffering, OTA rollback, and automatic 4G failover.
stm32f407-iot-gateway
lawrence
Views 118
Comments 0
Industrial Modbus gateway: STM32F103 + FreeRTOS firmware (Modbus RTU<->TCP, W5500, OTA with dual-partition bootloader) and a Linux host
modbus-gateway
lawrence
Views 118
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
