PRODINo MKR LoRa WAN Ethernet

ssekim

Published January 27, 2021

55 UCC

18 VAR

Original source (new tab)

Components

Hardware components

WIZnet - W5500

x 1

Ethernet chip

ATSAMD21G18

x 1

Microprocessor, 32-Bit ARM Cortex® M0+

CMWX1ZZABZ

x 1

LoRa Module

WIZnet parts

W5500 Datasheet

Project description

Thanks that the?PRODINo MKR LoRa WAN Ethernet?board owns?RS485, now you will be able to have a communication port for your RS485 devices! It will allow up to 32 devices to communicate through the same data line over a cable length of up to 1200m/4000ft. It is and the ultimate expansion that allows your board to connect to almost every legacy industrial system using serial connectivity such as industrial PLCs, controllers, drives and HMIs.

The RS485 can be use to turn old industrial systems like industrial machinery, heating systems and conveyors into new IoT devices. It supports?high speed 500 Kbps?in a short distance.

The board contains more a micro USB connector and a reset button. It is compatible with "Arduino MKR WAN 1300".

PRODINo MKR LoRa WAN Ethernet - KMP Electronics Ltd Shop -

Comments

Similar projects you might like

Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.

How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?

ElenaLee

Views 44
Comments 0

An open-source Source Measure Unit (SMU) designed for high-precision voltage/current sourcing and measurement with SCPI-based remote control via W5500 Ethernet.

vibepcb-smu

gunn

Views 28
Comments 0

There seems to be a lot of confusion (and a range of prices) surrounding the WizNet W5500-based Ethernet module we use for the RP23CNC.

Understanding WizNet W5500 for Your CNC Projects

sophia

Views 38
Comments 0

The Forlinx OKMX9352-C already has two native Gigabit Ethernet ports, so adding a WIZnet W5500 is not about compensating for insufficient processing power

How to Add a Third Ethernet Interface with W5500 on the Forlinx OKMX9352-C?

viktor

Views 28
Comments 0

Zephyr-Ethernet-Stress-Test is a small, focused tool: it pushes the W5500 driver with realistic concurrent traffic and records exactly where it fails

Hardening Zephyr's W5500 Driver: An Open-Source Ethernet Stress Test

viktor

Views 35
Comments 0

An RP2350-MINI(ETH) runs an MQTT broker and its live dashboard alone, splitting the W5500's eight hardware sockets into DHCP, web and five MQTT clients.

How Does an RP2350 Run an MQTT Broker and Its Dashboard on a W5500 With No PC Behind It?

Grace_Koo

Views 27
Comments 0

CRT Software: Hybrid Rocket Ground Control That Falls Back from LoRa to Fiber — A Dual-Link Design with ESP32 and W5500

🚀 CRT Software — Trainee 2026.1

scott

Views 54
Comments 0

Comments