Skip to content

W5500 Ethernet Module Initialization with MIotKit

Initializes W5500 on MIotKit (STM32), sets up SPI, configures network (IP/GW), and tests Ethernet on hl_miniOS. A practical guide for embedded Ethernet setup.

sophia

Published May 29, 2025

92 UCC

14 VAR

1 Followers

1 Following

Original author: Lazy Pig DemonOriginal source (new tab)

W5500 Ethernet Module Initialization with MIotKit

Components

Hardware components
W5500

WIZnet - W5500

x 1

WIZnet parts

Project description

📌 Project Overview Project Title: W5500 Ethernet Module Initialization with MIotKit Video Link: Lesson 5.2 - MIotKit Initialization: Configuring W5500 Creator: 懒惰的猪妖 (Lazy Pig Demon, developer of MIotKit) Platform: MIotKit (STM32-based development board) + WIZnet W5500 Ethernet module Operating System: hl_miniOS (custom RTOS) Development Environment: Keil MDK5 🧩 Components Used MIotKit Development Board: An STM32-based IoT development board WIZnet W5500: A hardware TCP/IP offload Ethernet controller RJ45 Ethernet Port: For physical Ethernet connectivity through W5500 ⚙️ Project Description…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like