This is b078 part for edgy_board project used W5500.
0
WIZnet - W5500
x 1
This design is part of the edgy board project.
You can find the part information from the below link.
https://github.com/skunkforce/edgy_boards/blob/master/in_progress.md
Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.
How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?
ElenaLee
Views 58
Comments 0
An open-source Source Measure Unit (SMU) designed for high-precision voltage/current sourcing and measurement with SCPI-based remote control via W5500 Ethernet.
vibepcb-smu
gunn
Views 34
Comments 0
There seems to be a lot of confusion (and a range of prices) surrounding the WizNet W5500-based Ethernet module we use for the RP23CNC.
Understanding WizNet W5500 for Your CNC Projects
sophia
Views 44
Comments 0
The Forlinx OKMX9352-C already has two native Gigabit Ethernet ports, so adding a WIZnet W5500 is not about compensating for insufficient processing power
How to Add a Third Ethernet Interface with W5500 on the Forlinx OKMX9352-C?
viktor
Views 31
Comments 0
Zephyr-Ethernet-Stress-Test is a small, focused tool: it pushes the W5500 driver with realistic concurrent traffic and records exactly where it fails
Hardening Zephyr's W5500 Driver: An Open-Source Ethernet Stress Test
viktor
Views 41
Comments 0
An RP2350-MINI(ETH) runs an MQTT broker and its live dashboard alone, splitting the W5500's eight hardware sockets into DHCP, web and five MQTT clients.
How Does an RP2350 Run an MQTT Broker and Its Dashboard on a W5500 With No PC Behind It?
Grace_Koo
Views 28
Comments 0
CRT Software: Hybrid Rocket Ground Control That Falls Back from LoRa to Fiber — A Dual-Link Design with ESP32 and W5500
🚀 CRT Software — Trainee 2026.1
scott
Views 63
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?