Skip to content

W5500-EVB-PICO2上のFuzixでEthernetに接続する話

Fuzix on W5500-EVB-PICO2: apply rpipico+W5500 patches, set IP in hex, build/flash, and verify networking with ifconfig, telnet, and htget.

matthew

Published September 24, 2025

Original author: kazueda · JapanOriginal source (new tab)

W5500-EVB-PICO2上のFuzixでEthernetに接続する話

Project description

Overview This tutorial shows how to run Fuzix (a Unix-like OS for constrained systems) on W5500-EVB-PICO2—a board that integrates RP2350 and WIZnet W5500—and bring it online via Ethernet. Unlike earlier Pico setups that needed jumper-wire SPI wiring to a W5500 module, EVB-PICO2 routes W5500↔RP2350 over on-board SPI, eliminating wiring and letting you focus on kernel/driver work, static IP configuration, build/flash, and verification with ifconfig / telnet / htget. (Zenn) Original Language & Author Originally published in Japanese on Zenn (Dec 17, 2024) as part of the Raspberry Pi Advent…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like