matthew

lamePod combines ESP32-S3, W5500 Ethernet, TAS5805M audio, and an XVF3800 mic array in an early, privacy-focused DIY smart-speaker design.

HaphazardBridge uses ESP32-S3 and W5500 to link Ethernet-only SDRs to ATAK over Wi-Fi, adding NAT, gRPC, CoT relays, and two field modes.

This DOE 20kW bidirectional wireless-charging truck used WIZnet Ethernet and industrial WiFi bridges to carry vehicle BMS status between two power-control DSPs

FSRI’s portable gas analyzer uses three WIZ750SR modules to network O₂, CO, and CO₂ sensors over TCP, with one PoE cable for power and data.

ETH_CANable is an open-source robotics networking tool from IRIS-ITS that uses an STM32G474 and W5500 to expose 2 CAN buses over Ethernet using UDP-based SLCAN.

NeuroFab Z1 Onyx is a 16-node RP2350B SNN cluster that uses W5500 Ethernet to deploy, monitor, manage files, and update node firmware through one controller.

UC San Diego RPL’s Phoenix Ground Station uses W5500 MACRAW Ethernet to send valve-state commands and receive sensor telemetry.

projectMM runs one 3D LED and DMX pipeline from ESP32 to desktop, using W5500 Ethernet on ESP32-S3 boards for large Art-Net lighting workloads.

Flaming Lotus Girls’ Haven uses distributed W5500-EVB-Pico lighting nodes and Embedded Rust to deliver Art-Net lighting across a 100-foot interactive sculpture

Flexi-Ninja is a fork of stepper-ninja for Expatria's hardware. Flexi-Ninja replaces the breakout board abstraction with a PlatformIO based build system and boa

YaSolR is ESP32 Solar Router firmware that routes solar production excess to water heaters or resistive loads, with support for W5500 Ethernet boards.

A SCADA-style UCC project using a P1AM-100 PLC with W5500 Ethernet, Modbus TCP, FastAPI middleware, React HMI, SQLite logging, PID, and safety interlocks.

OpenDeck is an open-source MIDI and OSC controller platform for DIY control surfaces, sensor interfaces, and Ethernet-connected OSC nodes with W5500 support.

Greenhouse management firmware for Waveshare RP2350-ETH-8DI-8RO boards, integrating W5500 Ethernet, MQTT, WebUI, sensors, and relay control.

NeOS builds a mini RISC-V OS on a Tang Nano 9K FPGA and connects W5500 Ethernet to explore networking on a tiny custom FPGA computer.

An RT-Thread smart model car project that adds W5500 Ethernet and UDP broadcast so the car and host device can exchange commands over LAN.

W55RP20 Smart Doorbell

An STM32F103 OTA bootloader that downloads firmware over W5500 Ethernet, stages it in W25Q64 flash, and installs it after CRC validation.

A browser-based tool for configuring, compiling, and flashing OnStepX telescope firmware, including W5100/W5500 Ethernet options for SmartWebServer.

An ESP32-S3 and W5500 Ethernet controller for monitoring solar thermal temperatures, controlling pumps, and logging system data through a local web UI.

A no_std Rust library that lets MCU nodes publish and subscribe to ROS 2 topics over Zenoh, demonstrated with RP2040 + WIZ630io Ethernet.

An ESP32 zonal ECU prototype, developed on Ubuntu/Linux, using W5500 Ethernet to explore vehicle-style networking and early SOME/IP.

An STM32 and W5500 Ethernet controller for solar DC bus monitoring, distributed water-heater control, MPPT load management, and energy data logging.

An ESP32-S3 CCTV/IoT firmware combining W5500 Ethernet, motion detection, SD recording, MQTT, and a web UI for wired LAN camera nodes.