STM32 Internet of things development board ESP8266+W5500 dual network WiFi module Ethernet AT instru
Internet of things development board
0
Components
Hardware components
WIZnet - W5500
x 1
Similar projects you might like
SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.
SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English
sophia-
Views 31
-
Comments 0
ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.
W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems
jakelee-
Views 93
-
Comments 0
modular USB-to-Ethernet bridge that makes your USB smart-home radios available across your LAN or Wi-Fi
How to Connect USB Smart-Home Radios with W5500 on the SMLIGHT SLZB-U2L?
viktor-
Views 49
-
Comments 0
SuperLongBoard: Why a CNC Shop Tired of EMI Chose W5500 Ethernet Over USB
SuperLongBoard
scott-
Views 67
-
Comments 0
ZenoLAN0505: A Vietnamese Modbus RTU ⇄ TCP DIN-Rail Gateway Built on ESP32 and W5500
IP Ethernet Wifi ZenoLAN0505
scott-
Views 94
-
Comments 0
DIN-rail ESP32-S3 controller: 16 digital inputs and 16 MOSFET outputs, WIZnet W5500 wired Ethernet, RS485, and Home Assistant/ESPHome support.
KinCony KC868-A16v3: 16-Channel ESP32-S3 I/O Controller with WIZnet W5500 Ethernet
ElenaLee-
Views 78
-
Comments 0
This project uses a Raspberry Pi Pico and WIZnet W5500 to extend a Flight Controller’s MAVLink communication over Ethernet.
MAVLink Ethernet Bridge with WIZnet W5500 (raspberry-pi-pico-w5500-mavlink-bridge)
lawrence-
Views 98
-
Comments 0