MQTTClient_Auth and UdpNTPClient on RASPBERRY_PI_PICO on MBED RASPBERRY_PI_PICO with W5x00 using Eth
Running examples of MQTT and NTP client using Ethernet libraries
4
Components
Hardware components
WIZnet - W5500
x 1
Project description
The following are debug terminal output when running example MQTTClient_Auth on RASPBERRY_PI_PICO with W5x00 using Ethernet Library using Arduino-mbed RP2040 core Start MQTTClient_Auth on MBED RASPBERRY_PI_PICO with W5x00 using Ethernet Library EthernetWebServer v1.7.1 [EWS] =========== USE_ETHERNET =========== [EWS] Default SPI pinout: [EWS] MOSI: 3 [EWS] MISO: 4 [EWS] SCK: 2 [EWS] SS: 5 [EWS] ========================= [EWS] Board : MBED RASPBERRY_PI_PICO , setCsPin: 5 ========================= Currently Used SPI pinout: MOSI:3 MISO:4 SCK:2 SS:5 ========================= Using mac index =…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
