Hackathon project: Ethernet ping-tester for Flipper Zero
2
WIZnet - W5500
x 1
On Dec 3, there was Hackathon in Moscow, it was related to Flipper Zero project.
Two authors – Efim and Ivan decided to create Ethernet ping-tester expansion module for Flipper Zero.
Following hardware components were selected: W5500 and STM32I0-Discovery
First 3D Design
SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.
SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English
sophia
Views 35
Comments 0
ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.
W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems
jakelee
Views 145
Comments 0
modular USB-to-Ethernet bridge that makes your USB smart-home radios available across your LAN or Wi-Fi
How to Connect USB Smart-Home Radios with W5500 on the SMLIGHT SLZB-U2L?
viktor
Views 54
Comments 0
SuperLongBoard: Why a CNC Shop Tired of EMI Chose W5500 Ethernet Over USB
SuperLongBoard
scott
Views 73
Comments 0
ZenoLAN0505: A Vietnamese Modbus RTU ⇄ TCP DIN-Rail Gateway Built on ESP32 and W5500
IP Ethernet Wifi ZenoLAN0505
scott
Views 99
Comments 0
DIN-rail ESP32-S3 controller: 16 digital inputs and 16 MOSFET outputs, WIZnet W5500 wired Ethernet, RS485, and Home Assistant/ESPHome support.
KinCony KC868-A16v3: 16-Channel ESP32-S3 I/O Controller with WIZnet W5500 Ethernet
ElenaLee
Views 79
Comments 0
This project uses a Raspberry Pi Pico and WIZnet W5500 to extend a Flight Controller’s MAVLink communication over Ethernet.
MAVLink Ethernet Bridge with WIZnet W5500 (raspberry-pi-pico-w5500-mavlink-bridge)
lawrence
Views 99
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?