PCBCrew Power Meter

Poly-phase (3-phase and single-phase) power meter with ESP32, PoE, and ADE7878/ADE7880.

WIZnet

Published April 11, 2023 · © Apache License 2.0 (Apache-2.0)

Original author: Bad Dummy TuxOriginal source (new tab)

Project description

ADE7854/7858/7868/7878/7880 poly-phase energy metering AFE ESP32-S3 Wiznet W5500 Ethernet Controller DP9905 PoE module DS1337 RTC and CR1220 battery holder DIP8 connector for 24Cxx EEPROM USB 2.0 Type-C connector for debugging About PCBCrew PCBCrew is a company that specializes in providing electronic design and manufacturing services to customers around the world. The company was founded in 2008 and is headquartered in Shenzhen, China. PCBCrew's services include PCB (printed circuit board) design, prototyping, assembly, and testing, as well as electronic product design and development. The…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

Jesse Hills turns a CoreS3 and W5500 PoE base into a touchscreen tester for Ethernet link, DHCP, IPv6 and ping, with fixes for a shared SPI bus.

How Does a W5500 Network Toolbox Diagnose Ethernet from an M5Stack CoreS3?

Benjamin

Views 83
Comments 0

Weidos doesn't use the W5500 as a plain Ethernet PHY/interface. Its official Ethernet.h-based library talks directly to the W5500's hardware TCP socket (TOE).

WeidmullerSA Weidos-ESP32-package : How Does Weidmüller Weidos Actually Use the W5500's TOE?

lawrence

Views 152
Comments 0

OI-Core, the ESP32-S3 master module of the OpenIndus rail-mounted PLC from Toulouse, gets its 10/100 Ethernet port from an embedded WIZnet W5500 on SPI.

What Role Does the W5500 Play in the OpenIndus OI-Core Modular Industrial PLC?

Benjamin

Views 95
Comments 0

Ooznest board support in grblHAL/ESP32 routes Telnet, WebSocket, FTP and WebUI over a W5500 SPI Ethernet link on the ESP32-S3, with Wi-Fi compiled alongside.

Why Did CNC Vendor Ooznest Choose W5500 Ethernet for Its grblHAL ESP32-S3 Board?

Benjamin

Views 117
Comments 0

Surat factory WiFi is unreliable, so the EaseEmbro MES gives its ESP32-S3 fingerprint terminal a W5500 wired Ethernet option. The platform runs 33 factories.

Why Did EaseEmbro Put a W5500 Wired Option in Its ESP32-S3 Attendance Terminal?

Benjamin

Views 94
Comments 0

A peer-reviewed 2026 paper wires an ESP32, three PZEM-004T sensors, and a W5500 Ethernet module into the BMKG Sleman station LAN to log 3-phase kWh in MySQL.

How Does a W5500 Wired ESP32 Monitor 3-Phase Power at a BMKG Geophysics Station?

Benjamin

Views 89
Comments 0

Five: Modbus TCP, S7, PROFINET DCP, OPC UA and EtherNet/IP. This ESP32-S3 firmware runs the W5500 in promiscuous mode to read Layer 2 frames.

Which Industrial Protocols Can a W5500 and ESP32-S3 Detect on an OT Network?

Benjamin

Views 160
Comments 0