EtherUNO is an Arduino-compatible board with on-board Ethernet, PoE support, USB-C socket, and uses the W5500 Ethernet controller.
[W5500] SuperHouse EtherUNO
bruno
Views 7082

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
16 projects
EtherUNO is an Arduino-compatible board with on-board Ethernet, PoE support, USB-C socket, and uses the W5500 Ethernet controller.
[W5500] SuperHouse EtherUNO
brunoViews 7082
Comments 0
"Reginald," a UDP-controlled surveillance robot, emphasizing simplicity, real-time control, encryption for security, and UDP for live feed and commands.
Reginald: a UDP Surveillance Bot; Control Via the Internet
irinaViews 4960
Comments 0
ESP32-C6-Bug WiFi 6, Bluetooth LE, and 802.15.4 board takes a PoE Ethernet shield
ESP32-C6-Bug WiFi 6, Bluetooth LE, and 802.15.4 board takes a PoE Ethernet shield
lawrenceViews 4605
Comments 0
Poly-phase (3-phase and single-phase) power meter with ESP32, PoE, and ADE7878/ADE7880.
PCBCrew Power Meter
ssekimViews 2688
Comments 0
The developer has submitted Pull Request #12232 to the official Meshtastic firmware repository, proposing Ethernet and PoE support for the RAK3312 platform.
meshtastic-rak3312-ethernet : Enabling Ethernet and PoE on Meshtastic RAK3312 with WIZnet W5100S
lawrenceViews 138
Comments 0
A Raspberry Pi Pico and W5500 monitor mains presence over SNMP, with loss/restore traps, LibreNMS integration and a PoE carrier design.
RF-UPS-Monitor: Mains Power Monitoring with RP2040 and W5500
Lihan__Views 105
Comments 0
A remote SDR receiver using RP2350, W6300, and PoE to control an RTL-SDR over Ethernet and stream I/Q data to GQRX through rtl_tcp.
rp2350-poe-airband-iq
lawrenceViews 154
Comments 0
Clock 2 combines GNSS timing, an ESP32-S3 and W5500 Ethernet to serve local NTP time, with PoE power, OLED status and browser diagnostics.
How Does Clock 2 Turn GNSS Pulses Into a W5500 Ethernet Time Server?
BenjaminViews 187
Comments 0
Alexey Titov's Eva node fits a wall box by splitting in two: sensors and a W5500 on the front PCB, RJ45 and a PoE module on the back.
How Does the Eva Wall-Box PoE Sensor Split W5500 Ethernet Across Two Boards?
BenjaminViews 302
Comments 0
Dedicated PoE environmental sensors for server rooms and network closets — the kind that speak SNMP and integrate directly with PRTG and Zabbix
Open-Source Platform for Server Room Environmental Monitoring : sensormeter-poe
lawrenceViews 479
Comments 0
A single PoE cable delivers power, control, and 1080p live video — automatically. Here's how we built a GoPro-to-Ethernet bridge with BLE, a Wi-Fi Soft-AP, and
esp32-s3-w5500-gopro-ble-livestream
lawrenceViews 561
Comments 0
MultiSensor-V2 evolves Carletz MultiSensor, a W5500 Ethernet and PoE-powered room node, with revised sensing, local wake-word AI, audio, IR, and HA Assist.
How Does MultiSensor-V2 Use W5500 PoE for HA Voice?
BenjaminViews 713
Comments 0
MESHBULLET is a DIY Meshtastic node that gives a Pico 2 (RP2350) a wired Ethernet and PoE uplink with WIZnet wiz850io or W6100, in a 3D-printed tube.
MESHBULLET: How to Add Wired Ethernet and PoE to a Meshtastic RP2350 Node with WIZnet W6100
BenjaminViews 689
Comments 0
A FeatherWing that delivers WIZnet W5500 Ethernet plus up to 4W isolated IEEE 802.3at PoE—so one Ethernet cable can power and network your Feather.
PoE FeatherWing: Add WIZnet W5500 Ethernet + 4W PoE Power to Any Feather (Drop-In Compatible)
junlee0615Views 804
Comments 0
This project provides a complete ESPHome configuration for monitoring three separate water meters using an ESP32-S3-POE-ETH board with W5500.
ESPHome Triple Water Meter (ESP32-S3-POE-ETH)
BenjaminViews 1591
Comments 0
Open-source GPIB-to-Ethernet adapter using W5500 chip. Supports PoE/USB-C power, VXI-11.2 & Prologix protocols. Cost-effective solution.
PoE-powered GPIB Adapter With Ethernet And USB-C Support
BenjaminViews 3130
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?