PoE FeatherWing: Add WIZnet W5500 Ethernet + 4W PoE Power to Any Feather (Drop-In Compatible)
A FeatherWing that delivers WIZnet W5500 Ethernet plus up to 4W isolated IEEE 802.3at PoE—so one Ethernet cable can power and network your Feather.
0
Components
Hardware components
WIZnet - W5500
x 1
Patrick Van Oosterwijck - PoE FeatherWing (Silicognition)
x 1
WIZnet - WIZnet io Library
x 1
Arduino - Arduino IDE
x 1
Project description
Introduction Let’s start with the problem. Feather boards are great for fast prototyping, but real deployments often need two things: stable wired Ethernet and simple power wiring. This project solves both in one move. The PoE FeatherWing gives your Feather a real Ethernet port and lets it run from Power over Ethernet, so one cable can handle networking and power. WIZnet Product Integration Here’s the key integration point: the board uses WIZnet W5500 as its Ethernet controller. That choice matters because it keeps things familiar. If you’ve used the Adafruit Ethernet FeatherWing, you…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
