Skip to content

Current Tracker with W5100 Ethernet shield

Current Tracker with W5100 Ethernet shield

gemma

Published February 21, 2022

60 UCC

7 WCC

14 VAR

Original source (new tab)

Components

Hardware components
Arduino UNO

Arduino - Arduino UNO

x 1

Arduino Ehternet Shield

x 1

Current Transformer SCT-013-000

x 1

Qualcomm DragonBoard 410c

x 1

Software Apps and online services
AWS IoT

AmazonWebServices - AWS IoT

x 1

AWS SNS

AmazonWebServices - AWS SNS

x 1

AWS EC2

AmazonWebServices - AWS EC2

x 1

Project description

Story Do you want to know if a device went haywire or is working just fine? This project is a simple AI system to prove that with current metering you can. You will be informed when something goes wrong. The following system can do it: General view of system from http://openenergymonitor.org/emon/buildingblocks/how-to-build-an-arduino-energy-monitor-measuring-current-only Create the circuit, connect shield to Arduino, and upload sketch to Arduino. Connect external power supply to Arduino (at least 9 Volts for stability). It should?look like this: Connecting After this install Debian to the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like