Network Connected Signal Analyzer

austin

Published February 02, 2022

44 UCC

3 WCC

13 VAR

1 Followers

Original source (new tab)

Components

Hardware components

WIZnet - W5500

x 1

WIZnet parts

W5500 Datasheet

Project description

This project is about a single-channel signal analyzer and signal generator controlled over an Ethernet connection. The application(s) run on a PC. The board contains some signal conditioning circuitry and a dsPIC33 plus a Wiznet Wiz550io Ethernet module. It is a kind of simple Red Pitaya, not running Linux and without FPGA programming.

New Software

A revision of this project was published in the May 2017 edition of Elektor (NCSA II, project nr. 160362). Updated software for this project can be found at GitHub, more details are here. Make sure to read all the comments and project updates, there is a lot of useful information.

Links & Resources

Version 1

Version 2

https://youtu.be/YIxX7vJ4ueI

Comments

Similar projects you might like

Upstream MicroPython fix keeps an active W5500's SPI bus alive through soft reset on STM32 with lwIP, qualified with 60 resets and 20 upload cycles.

Why Did a MicroPython Soft Reset Hang an STM32 with a W5500, and How Does PR #19800 Fix It?

ElenaLee

Views 34
Comments 0

Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.

How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?

ElenaLee

Views 44
Comments 0

An open-source Source Measure Unit (SMU) designed for high-precision voltage/current sourcing and measurement with SCPI-based remote control via W5500 Ethernet.

vibepcb-smu

gunn

Views 28
Comments 0

There seems to be a lot of confusion (and a range of prices) surrounding the WizNet W5500-based Ethernet module we use for the RP23CNC.

Understanding WizNet W5500 for Your CNC Projects

sophia

Views 38
Comments 0

The Forlinx OKMX9352-C already has two native Gigabit Ethernet ports, so adding a WIZnet W5500 is not about compensating for insufficient processing power

How to Add a Third Ethernet Interface with W5500 on the Forlinx OKMX9352-C?

viktor

Views 28
Comments 0

Zephyr-Ethernet-Stress-Test is a small, focused tool: it pushes the W5500 driver with realistic concurrent traffic and records exactly where it fails

Hardening Zephyr's W5500 Driver: An Open-Source Ethernet Stress Test

viktor

Views 35
Comments 0

An RP2350-MINI(ETH) runs an MQTT broker and its live dashboard alone, splitting the W5500's eight hardware sockets into DHCP, web and five MQTT clients.

How Does an RP2350 Run an MQTT Broker and Its Dashboard on a W5500 With No PC Behind It?

Grace_Koo

Views 27
Comments 0

Comments