Skip to content

Ethernet Shield W5100 for Arduino + microSD card reader ? Okystar OKY2101

Ethernet Shield W5100 for Arduino + microSD card reader ? Okystar OKY2101

wiz_chandana

Published June 02, 2022

Project description

W5100?

  • All-in-one Ethernet Controller : Hardware TCP/IP, MAC & PHY
  • Fully hardwired network protocol?
  • Direct & Indirect Bus and SPI for Host Interface
  • Stable Data Communication
The W5100 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems. W5100 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years.?W5100 uses a 16ytes internal buffer as its data communication memory. By using W5100, users can implement the Ethernet application they need by using a simple socket program instead of handling a complex Ethernet Controller.
It is possible to use 4 independent hardware sockets simultaneously. BUS (Direct ?& Indirect) & SPI (Serial Peripheral Interface) are provided for easy integration with the external MCU.

Key Features of W5100
  • Hardwired TCP/IP protocols :?TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • Un-attackable hardware network engine for preventing network attacks such as flooding, spoofing, injection
  • Host Interface : Direct/Indirect Bus & Serial Peripheral Interface (SPI MODE 0, 3)
  • 4 Independent hardware socket
  • Internal 16Kbytes memory for TCP/IP packet processing
  • 10BaseT / 100Base TX Ethernet PHY Embedded
  • Support Auto-Negotiation (Full & Half Duplex, 10 & 100 Based)
  • Support Auto-MDIX
  • 3.3V Operation with 5V I/O signal tolerance
  • LED outputs (TX, RX, full/half duplex, Collision, link, speed)
  • 80LQFP lead-free package (10x10mm)

Comments

Similar projects you might like

Comments