Exploring esp-idf-svc: Building Type-Safe Rust Applications on ESP32
Exploring esp-idf-svc: Building Type-Safe Rust Applications on ESP32
lawrence
Views 5163

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,102 projects
Exploring esp-idf-svc: Building Type-Safe Rust Applications on ESP32
Exploring esp-idf-svc: Building Type-Safe Rust Applications on ESP32
lawrenceViews 5163
Comments 0
Industrial 12ch DAQ firmware on STM32F407 with CS5530 ADCs. W5500 Ethernet outputs calibrated data via Modbus TCP and custom UDP. FreeRTOS separates sampling an
X5012B
TheoImViews 396
Comments 0
X68000 joy stick
X68000 joy stick
jadenViews 414
Comments 0
A bidirectional CAN bus to Ethernet/WiFi bridge implementation for the Raspberry Pi Pico W written in Rust using the Embassy async framework.
A bidirectional CAN bus to Ethernet/WiFi bridge implementation for the Raspberry Pi Pico W
viktorViews 1351
Comments 0
Embassy’s embassy-net-wiznet just gained an initial WIZnet W6300 chip driver in Rust, enabling Embassy applications to talk to the newest 10/100 TOE controller
How to Get W6300 Hardware TCP/IP Running in Rust Embassy?
viktorViews 2448
Comments 0
A bird detection system to monitor the activity of birds in a geodesic dome using w5300 ethernet module and stm32F4 Discovery
TinyML Based Bird watcher
Sunny_Views 347
Comments 0
Hybrid IIoT Gateway Case Study: Unifying wired W5500 Modbus & wireless LoRaWAN data into a single, integrated dashboard.
Unifying Industrial Chaos: A Hybrid IIoT Gateway using W5500 & LoRaWAN
Grace_KooViews 808
Comments 0
STM32F103 and W5500 based gateway converting RS-485 Modbus sensor data into TCP/IP for smart factory, greenhouse and building monitoring systems.
CO2_Gateway
Aimee0Views 317
Comments 0
ESP32-S3 pump controller enforcing LOCAL/REMOTE gating and hardwired STOP; Modbus 3-phase current sensing, TLS MQTT telemetry/commands, and dry-run shutdown.
FieldLink: ESP32-S3 Pump Controller with Local/Remote Interlock and MQTT Telemetry
josephsrViews 380
Comments 0
WIZnet W5500-EVB-Pico 보드에서 ESPHome을 유선 이더넷으로 구동해 Home Assistant에 연결하는 예제 프로젝트
W5500-EVB-Pico + ESPHome: RP2040 유선 이더넷 스마트 노드( Home Assistant 연동 )
sophiaViews 463
Comments 0
Zephyr 워크스페이스 밖에서 RP2350+W6300 이더넷 보드를 빌드·패키징하는 실전 템플릿. 커스텀 보드/드라이버/설정을 한 프로젝트로 묶어 “재현 가능한 빌드”를 만든다.
oss-ethw6300 — Zephyr External App Blueprint for RP2350 + W6300
sophiaViews 276
Comments 0
DMA and W5500 ethernet chip
DMA and W5500 ethernet chip
masonViews 829
Comments 0
Zephyr PR #100919 standardizes W5500 MAC config, replacing custom hacks with official APIs for easy mass production.
[Zephyr] W5500 Driver Now Supports Standard MAC Address Configuration (PR #100919)
Grace_KooViews 954
Comments 0
This project uses W5500 hardware offload to drive 12,288 LEDs at 30 FPS with zero frame drops or latency.
From Impossible to Reality: W5500-Based 12,288 LED Control System
Grace_KooViews 285
Comments 0
How to Choose the Best W6100 Development Board: A Complete Buying Guide
How to Choose the Best W6100 Development Board: A Complete Buying Guide
Grace_KooViews 266
Comments 0
Turn the WeAct RP2350A_V20 into a wired IoT node using WIZnet W5500 over SPI—fast bring-up, stable Ethernet, and simple socket-based networking.
Ethernet for RP2350A in Minutes: WeAct RP2350A_V20 + WIZnet W5500 (SPI Hardwired TCP/IP)
junlee0615Views 417
Comments 0
A digital axle counter architecture that uses three magnetic-inductive proximity sensors for reliable wheel detection, direction inference, and speed estimation
High-Speed Rail Axle Counter Using Multiple Magnetic Inductive Proximity Sensors
josephsrViews 331
Comments 0
MODBUS_TCP_IP_with_Arduino_STM32_W5500
MODBUS_TCP_IP_with_Arduino_STM32_W5500
masonViews 1182
Comments 0
산업용(Industrial grade) 사양을 목표로 만든 하드웨어
Takamul PLC
brunoViews 241
Comments 0
LabVIEW TCP/IP Read with Wiznet 5500 EVB Pico via TCP/IP
LabVIEW TCP/IP Read with Wiznet 5500 EVB Pico via TCP/IP
masonViews 950
Comments 0
cybergear_m5 shows CAN-based control of Xiaomi CyberGear with M5Stack, with optional W5500 Ethernet + PoE for remote monitoring and system integration.
Controlling Xiaomi CyberGear via CAN with M5Stack — A Practical Robotics Control Reference
matthewViews 578
Comments 0
ESP32 runs an EtherCAT master (SOEM) over W5500 Ethernet while using Wi-Fi UDP/IP for monitoring—demoed on DevKitC+WIZ850io and M5Stack LAN Module.
EtherCAT Meets Wi-Fi: An ESP32 + W5500 Dual-Network Control Demo (ESP32でEtherCAT-WiFiゲートウェイ)
matthewViews 2582
Comments 0
The NFC_ESP32_W5500_PODIUM is an interactive media control system designed for live performance, museum installations, and interactive exhibitions.
How Does NFC-Based Interactive Media Control Work with ESP32 and W5500?
BenjaminViews 510
Comments 0
STM32-based Ethernet-RS485 IoT gateway
STM32-based Ethernet-RS485 IoT gateway
scottViews 413
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?