How Does NFC-Based Interactive Media Control Work with ESP32 and W5500?

The NFC_ESP32_W5500_PODIUM is an interactive media control system designed for live performance, museum installations, and interactive exhibitions.

Benjamin

Published January 26, 2026

166 UCC

11 WCC

31 VAR

2 Following

Original author: ANOOF COriginal source (new tab)

Components

Hardware components

WIZnet - W5500

x 1

Espressif - ESP32

x 1

WIZnet parts

W5500 Datasheet

Project description

1. What This Project Actually Is The NFC_ESP32_W5500_PODIUM is an interactive media control system designed for live performance, museum installations, and interactive exhibitions. made by google nano banana At the hardware level, the system combines: ESP32 as the real-time NFC polling and network controller WIZnet W5500 for deterministic wired Ethernet communication NFC Reader (PN532/RC522) for contactless tag identification Max/MSP patches for audio-visual media response At the protocol level, it implements OSC (Open Sound Control) over UDP, the de facto standard for real-time media…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

A peer-reviewed 2026 paper wires an ESP32, three PZEM-004T sensors, and a W5500 Ethernet module into the BMKG Sleman station LAN to log 3-phase kWh in MySQL.

How Does a W5500 Wired ESP32 Monitor 3-Phase Power at a BMKG Geophysics Station?

Benjamin

Views 89
Comments 0

Five: Modbus TCP, S7, PROFINET DCP, OPC UA and EtherNet/IP. This ESP32-S3 firmware runs the W5500 in promiscuous mode to read Layer 2 frames.

Which Industrial Protocols Can a W5500 and ESP32-S3 Detect on an OT Network?

Benjamin

Views 159
Comments 0

In this open KiCad gateway an ADIN1110 holds the 10BASE-T1L pair and a W5500 carries it onto standard Ethernet, both on one ESP32-S3 over separate SPI buses.

How Does a 10BASE-T1L Field Port Reach Standard Ethernet Through a W5500?

Benjamin

Views 96
Comments 0

ULSTU put a W5500 on the ESP32 board of its Ackermann teaching robot, so a Jetson AGX Xavier sends JSON-RPC drive commands and reads IMU data over wired UDP.

Why Does a W5500 Ethernet Link Carry ROS 2 Drive Commands in the ULSTU Buggy?

Benjamin

Views 131
Comments 0

hexinttp's ESP-IDF firmware maps Modbus RTU and TCP registers to named points, publishes them over MQTT, and serves 11 MCP tools, with W5500 as default route.

How Does an ESP32-S3 Modbus Gateway Serve Field Points as MCP Tools over W5500 Ethernet?

Benjamin

Views 218
Comments 0

YamBMS is an ESPHome project that merges parallel BMS units into one battery for the inverter. Its two ESP32-S3 Ethernet board files both configure a W5500.

How Does YamBMS Merge Multiple ESS BMS Units for One Inverter Over W5500 Ethernet?

Benjamin

Views 144
Comments 0

BREMA firmware makes busware's TUL KNX stick answer MCP over HTTP, so an agent can commission KNX devices. A PoE W5500 extension is the wired path.

How Does BREMA Make a KNX Stick Its Own MCP Server, and Where Does PoE W5500 Fit?

Benjamin

Views 252
Comments 0