Wiznet makers

A device which connects to web radio urls and dowload mp3 files for local sound play.

A lightweight Rust driver for the WIZnet W5500 Ethernet chip using SPI. Designed for no_std embedded systems with built-in TCP/IP offload (TOE).

This tutorial demonstrates how to control industrial Arduino systems using the WIZnet W5100 Ethernet Shield through Modbus TCP over RTU protocol.

Using MicroPython and WIZnet W5500 EVB-Pico, this project enables stable Ethernet communication for Raspberry Pi Pico, including DHCP, ping, and TCP socket test

A device that shows the your username and the current song playing on the LCD screen using CircuitPython and W5100S-EVB-Pico 2

A very simple program that teaches you how to use the W5100S-EVB-Pico 2 on the Web Editor with CircuitPython and control through IOT platforms such as Adafruit

This project uses ESP32 with a W5500 to collect temperature and humidity data from a DHT22 sensor and send it to an MQTT broker using async communication.

Review WIZnet W55RP20-EVB-Pico

EthernetSP Library for Spresense with W5500-Ether add-on board

Using the simple UART of the WIZnet W7500 for a serial loopback

This guide explains how to connect ESP32-CAM to the internet using a wired Ethernet connection.

Remote control your robot with Kinect motion recognition + W5100 Ethernet 🚀.

Serial to Ethernet Converter with WIZ750SR, Remote Control Support 🚀

Using WIZnet W5500, this project builds a secure open-source gateway for industrial PLCs, integrating Apache PLC4X and MyNewt RTOS.

W5500-EVB-Pico integrates **RP2040 MCU** & **W5500 Ethernet**, supports **Zephyr RTOS**, and is available from **nRF Connect SDK v2.9.1** for wired networking

This guide explains how to connect a Raspberry Pi Pico or Pico 2 to the internet using a wired Ethernet connection

QOpenRP-W5500 is an RP2040-based dev board with a W5500 Ethernet chip, supporting SPI, PoE, and Pico-compatible pinout for IoT, networking, and automation

CiferTech's Tempo: Enhancing IoT Edge Computing with ESP32 and WIZnet W5500

This project demonstrates how to establish reliable and efficient Ethernet communication using the ESP32 microcontroller and the W5500 Ethernet module.

This project demonstrates how to set up and use socket communication with an STM32 board and a W5500 Ethernet module in a MicroPython environment.

Ray J’s Flipper Box is the ultimate Flipper Zero expansion module that includes every conceivable hardware component one could want.

w5500-hl

General purpose development board based on WIZnet's W5500 and Espressif's ESP32-S3 MCU. With RJ45 Ethernet connector, PHY bridge chip W5500, USB-C, 2 LEDs

Polish open-hardware specialist Sonocotta introduces the Esparagus Echo series, featuring the ESP32-S3-based Esparagus Solo and Duo devices. These edge voice co