How to Build High-Performance Remote Firmware Updates with WIZnet W5500 on STM32?

This commercial firmware architecture uses WIZnet W5500 with an STM32 microcontroller to perform HTTP-based remote firmware updates through In-Application Progr

mark

Published July 18, 2026

117 UCC

8 WCC

23 VAR

Original author: bond007Original source (new tab)

Project description

How to Build High-Performance Remote Firmware Updates with WIZnet W5500 on STM32? Summary This commercial firmware architecture uses WIZnet W5500 with an STM32 microcontroller to perform HTTP-based remote firmware updates through In-Application Programming. The project supports HTTP GET and POST workflows, checksum-based image validation, and a dual-bank rollback concept intended to preserve the previous firmware when an update fails. W5500 supplies the Ethernet MAC/PHY, hardwired TCP/IP processing, socket engine, and network buffers, while the STM32 manages HTTP data, Flash programming…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

This education-focused project explains how to design a stable Ethernet interface around the WIZnet W5500 on an MCU board.

How to Design Reliable Ethernet Wiring with WIZnet W5500 on MCU Boards?

Arnold

Views 130
Comments 0

his project uses an FPGA programmed in Verilog to control a WIZnet W5500 Ethernet controller without relying on an MCU-based C driver.

How to Build FPGA Ethernet with WIZnet W5500 on Verilog?

Arnold

Views 168
Comments 0

This project uses an NXP LPC1758/LPC17xx microcontroller and WIZnet W5500 to implement an SNMPv2 agent for industrial device monitoring and management.

How to Build an Industrial SNMP Agent with WIZnet W5500 on LPC1758?

ronpang

Views 128
Comments 0

This commercial firmware architecture uses WIZnet W5500 on STM32 to implement a wired Ethernet MQTT client.

How to Build a Commercial MQTT Client with WIZnet W5500 on STM32?

ronpang

Views 111
Comments 0

This education and maker project uses WIZnet W5500 on an STM32 platform to build wired Ethernet communication with NTP-based RTC time synchronization.

How to Synchronize RTC Time with WIZnet W5500 on STM32?

gavinchang

Views 215
Comments 0

This education and maker-oriented project uses WIZnet W5500 with STM32F103RET6 and FreeRTOS to build a wired Ethernet MQTT node.

How to Build FreeRTOS MQTT Networking with WIZnet W5500 on STM32F103?

gavinchang

Views 260
Comments 0

This education and commercial evaluation article explains how to use WIZnet W5500 with TI DSP28335 / TMS320F28335 to build wired Ethernet examples for network-s

How to Build DSP Ethernet Examples with WIZnet W5500 on DSP28335?

mark

Views 140
Comments 0