A Rust-based adaptor that exposes a Hamlib rotctld interface for network control of a G-5500 azimuth/elevation rotator.
Ethernet Hamlib Adaptor for the G-5500 Azimuth/Elevation Rotator
josephsr
Views 180

Comments 0
Microcontroller board with the Raspberry Pi RP2040 and the W5500 Ethernet chip in the Raspberry Pi Pico form factor.
153 projects, page 1 of 7
A Rust-based adaptor that exposes a Hamlib rotctld interface for network control of a G-5500 azimuth/elevation rotator.
Ethernet Hamlib Adaptor for the G-5500 Azimuth/Elevation Rotator
josephsrViews 180
Comments 0
quickly check ethernet RJ45 sockets for connectivity
rj45alive
jadenViews 142
Comments 0
Plug in an RJ-45 cable and the MAC address of the connected device appears on the e-paper screen within 5 seconds.
MAC-scan-W5500 :Pocket Ethernet Identifier with e-Paper
lawrenceViews 196
Comments 0
modbus-io-module
modbus-io-module
masonViews 248
Comments 0
PicoTuner Ethernet Interface
How to Run PicoTuner over Ethernet with W5500-EVB-Pico on Raspberry Pi Pico?
viktorViews 292
Comments 0
Learn how to flash official MicroPython v1.23.0 firmware onto the W5500-EVB-PICO board. This enables full TCP/IP stack (TCP, UDP, DHCP, DNS) support
W5500-EVB-PICO with MicroPython: Firmware Flashing and Ethernet Setup on RP2040
ronpangViews 601
Comments 0
Open-source KiCad PCB acting as a power distribution and SPI hub motherboard for W5100S/W5500-EVB-Pico, driving six LED lamp units in a university building-scal
Powering 57,000 LEDs: A Custom Motherboard for W5500-EVB-Pico
BenjaminViews 465
Comments 0
CueB Gen 2 is an Ethernet-based cue light system that delivers real-time signals between stage managers and production crews in live performance environments.
CueB
Aimee0Views 286
Comments 0
https://github.com/wseaton/cloggo
cloggo
Grace_KooViews 887
Comments 0
UDP-based relay controller for a university rover—receives JSON commands over Ethernet and switches power to rover subsystems via W5500 EVB Pico.
METU ROVER Power Control: UDP Relay Switching with W5500 EVB Pico
BenjaminViews 450
Comments 0
A Local Stratum-1 Time Infrastructure Powered by W5500
W5500-EVB-Pico+M5Stack用GPSユニット+TM1637でGPSNTPサーバを構築
scottViews 434
Comments 0
A MicroPython-based NTP server that uses a GPS receiver as an accurate time source, serves time over Ethernet via the WIZNET5K (W5500).
How to Build a GPS-Synchronized NTP Time Server with W5500-EVB-Pico and MicroPython
BenjaminViews 2302
Comments 1
WIZnet W5500-EVB-Pico 보드에서 ESPHome을 유선 이더넷으로 구동해 Home Assistant에 연결하는 예제 프로젝트
W5500-EVB-Pico + ESPHome: RP2040 유선 이더넷 스마트 노드( Home Assistant 연동 )
sophiaViews 415
Comments 0
LabVIEW TCP/IP Read with Wiznet 5500 EVB Pico via TCP/IP
LabVIEW TCP/IP Read with Wiznet 5500 EVB Pico via TCP/IP
masonViews 925
Comments 0
Implements a Protocol Break Relay—a security pattern from the Cross Domain Solution (CDS) domain—using Rust on the W5500-EVB-Pico board.
How Does Rust Enable Protocol Break Security on W5500-EVB-Pico?
BenjaminViews 814
Comments 0
A quick PoC: run Arduino Ethernet WebServer on W5500-EVB-Pico, then replicate it on Raspberry Pi Pico with a W5500 SPI module.
From PoC to Custom: W5500-EVB-Pico & Pico Module
sophiaViews 433
Comments 0
It is a project that developed an autonomous unmanned surface vessel (ASV) platform designed to efficiently patrol and monitor coastal waters.
RoboBoat : SimLE SeaSentinel Team ASV
Aimee0Views 279
Comments 0
CycloneTCP enables WIZnet W5500 EVB to operate as a software-driven Ethernet interface, supporting certified, low-resource, and advanced-protocol systems.
oryx-embedded
Grace_KooViews 384
Comments 0
The apex MRMSS:AMulti-Role Mission Support System and Service Module Simulator for Payloads of Sounding Rockets and Other Space Applications
W5500-EVB-Pico Powers DLR’s Rocket Simulator
brunoViews 521
Comments 0
RP2040-based Art-Net node built on WIZnet W5500-EVB-Pico drives 4 × 170 WS2812B pixels at ≈120 FPS, offering 5-24 V input and compact 3-D-printed enclosure.
4-Universe Art-Net LED Controller with WIZnet W5500-EVB-Pico
Lihan__Views 720
Comments 0
A prototype solar station monitoring system using the WIZnet W5500-EVB-Pico and INA260 sensors to measure voltage and current and transmit the data over Etherne
Project-OVSG
Grace_KooViews 1040
Comments 0
This repository shows the usage of a standard WIZnet W5500-EVB-Pico board with ESPHome.
w5500-evb-pico-esphome
lawrenceViews 5527
Comments 0
Using MicroPython and WIZnet W5500 EVB-Pico, this project enables stable Ethernet communication for Raspberry Pi Pico, including DHCP, ping, and TCP socket test
🚀 Micropython with WIZnet W5500 EVB: Reliable Ethernet Communication for Raspberry Pi Pico
matthewViews 12479
Comments 0
Here's a concise summary for your guide on building the WIZnet-PICO-C library using the Raspberry Pi Pico extension in VS Code
A Simple Guide to Building the WIZnet-PICO-C Library with Raspberry Pi Pico in VS Code
TheoImViews 767
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?