Interpretation of the program for DSP2812 to control W5500, 3.22
Interpretation of the program for DSP2812 to control W5500, 3.22
0
Project description
Interpretation of CMD files Set this pin low to indicate microcomputer mode, and the vector table points to the Boot Rom. ROM: origin = 0x3FF000, length = 0x000FC0 /* boot ROM available if MP/MCn=0 */ The process starts here. Let’s look at the storage image again. allocate program space PRAMH0: origin = 0x3f8000, length = 0x003000boot ROM available if MP/MCn=0 */ But there is a problem, that is, I occupy the reserved space, because the CMD command shows that the program has insufficient space, and problems are likely to occur. If something goes wrong, the first solution is to put the program…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
