It is based on the Wiznet W5100 Ethernet chip which a network (IP) stack capable of both TCP and UDP.
2
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
This guide shows how to build and test a light-controlled LED system using Blockless and the W5100S-EVB-Pico.
Quick Start with Blockless to Realize Hardware Creations
ruilixin6
Views 103
Comments 0
A Java 21 robotics stack linking Jetson control to ODrive motors through a W5100S Ethernet bridge with binary messaging and watchdog safety.
OneTouch: W5100S-Based Ethernet Motor Control and Robotics Messaging Stack
josephsr
Views 200
Comments 0
LoRa mesh networking platform designed to exchange text messages, location data, and telemetry without relying on Internet or cellular infrastructure
MESHCN Firmware: Extending an Off-Grid LoRa Mesh Network with W5100S Ethernet
sophia
Views 135
Comments 0
CONTROL_POWER_MQTT: A 4-Channel Remote Power Control System Built on Arduino Mega and W5100/W5500
CONTROL_POWER_MQTT
scott
Views 194
Comments 0
US11269308B2 lists a generic Ethernet Shield in a smart PLC architecture. Arduino W5100/W5500 shields show one possible WIZnet path.
How Does a WIZnet-Based Arduino Ethernet Shield Fit into a Smart PLC Patent?
Benjamin
Views 225
Comments 0
An nRF5340 IoT gateway funneling BLE data over W5100S wired Ethernet, with PoE for data and power on one cable.
repeat
Grace_Koo
Views 180
Comments 0
Arduino Mega 2560 + Wiznet W5100 Ethernet Shield 기반의 온도·습도·난방 모니터링 시스템
Ethernet Retrofit for Heating & Home Monitoring
sophia
Views 210
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?