Temperature and humidity control is implemented using a W5500 + STM32 + DHT12 microcontroller
Temperature and humidity control is implemented using a W5500 + STM32 + DHT12 microcontroller, and can be controlled via WeChat or a web browser.
0
Project description
his is what the board looks like. It includes the schematic and Keil 4 source code. The DHT12 is the second generation, with higher precision than the first generation . Previously, I used an open-source microcontroller networking protocol stack, FuIP, based on the ENC28J60. Recently, I've been using a W5500 network chip and an STM32F103 MCU for control design. Once connected to a router, it can automatically obtain/fix an IP address. Device control is via a mobile app or WeChat, allowing control of the device's built-in relays and viewing temperature and humidity sensor readings. This…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
