WIZ-Cam -- An ethernet-ready IP-Camera supporting HTTP and RTSP using W55MH32
Meet WIZ-Cam -- A MicroPython-powered IP Camera
November 05, 2026
Views 95

Comments 0
WIZ-Cam -- An ethernet-ready IP-Camera supporting HTTP and RTSP using W55MH32
Meet WIZ-Cam -- A MicroPython-powered IP Camera
November 05, 2026Views 95
Comments 0
A connected AI chessboard can use the WIZnet W5500 Ethernet controller with an STM32F4 microcontroller to synchronize chess moves, communicate with remote playe
How to Build a Connected AI Chessboard with WIZnet W5500 on STM32?
October 23, 2026Views 72
Comments 0
This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi
How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?
September 25, 2026Views 90
Comments 0
This project architecture combines an STM32 microcontroller, an OV2640 camera, and a WIZnet W5500 Ethernet controller to stream JPEG images directly to a web br
How to Stream OV2640 JPEG Frames with W5500 on an STM32 MCU?
September 11, 2026Views 158
Comments 0
This project builds a remote camera system around an STM32F4 MCU, an OV2640 image sensor, and a WIZnet W5500 Ethernet controller.
How to Stream OV2640 Camera Data with W5500 on STM32F4?
August 14, 2026Views 276
Comments 0
This education-focused project explains how to design a stable Ethernet interface around the WIZnet W5500 on an MCU board.
How to Design Reliable Ethernet Wiring with WIZnet W5500 on MCU Boards?
July 18, 2026Views 207
Comments 0
his project uses an FPGA programmed in Verilog to control a WIZnet W5500 Ethernet controller without relying on an MCU-based C driver.
How to Build FPGA Ethernet with WIZnet W5500 on Verilog?
July 18, 2026Views 234
Comments 0
This article explains a MicroPython Ethernet node architecture using an ESP32-class MCU and the WIZnet W5500, with broad coverage across network stack behavior,
How to Build a Multi-Use MicroPython Ethernet Node with WIZnet W5500 on ESP32?
July 03, 2026Views 204
Comments 0
This article explains a commercial-oriented MicroPython Ethernet node using an ESP32-class MCU and the WIZnet W5500
How to Build a Commercial High-Performance MicroPython Ethernet Node with WIZnet W5500 on ESP32?
July 03, 2026Views 208
Comments 0
Use the popular XiaoZhi AI in China on the W55MH32 chip using MicroPython and create your own personal AI assitant.
Personal AI assistant with W55MH32
June 01, 2026Views 544
Comments 0
This project demonstrates how to use software SPI on the STC32G144K246 microcontroller to drive the WIZnet W5500 Ethernet controller as a TCP client.
How to Build a TCP Client with W5500 on STC32G144K246?
May 29, 2026Views 340
Comments 0
This project shows how an STC32G144K246 microcontroller can obtain an IP address automatically through DHCP using the WIZnet W5500 Ethernet controller.
How to Implement DHCP Firmware with W5500 on STC32G144K246?
May 29, 2026Views 307
Comments 0
This STM32F10x project demonstrates UDP communication with the WIZnet W5500 Ethernet controller using WIZnet ioLibrary.
How to Build an 8-Socket UDP Client/Server Model with W5500 on STM32F10x?
May 08, 2026Views 368
Comments 0
This STM32F10x project builds a TCP client using the WIZnet W5500 Ethernet controller and WIZnet ioLibrary.
How to Build a W5500 TCP Client with STM32F10x?
May 08, 2026Views 369
Comments 0
This project explains how to implement efficient audio playback on W55MH32 using I2S with DMA, and extend it to Ethernet-based streaming via TCP or MQTT.
How to Stream Audio Using I2S + DMA with Ethernet on W55MH32?
April 10, 2026Views 387
Comments 0
This project explains how to use interrupt mechanisms on the W55MH32 to handle real-time events and transmit them over Ethernet using TCP or MQTT.
How to Implement Interrupt-Driven Event Handling with Ethernet on W55MH32?
April 10, 2026Views 319
Comments 0
This source is an architecture-oriented introduction to pairing ESP32 or ESP32-S3 with the W5500 for wired Ethernet applications.
How to Integrate W5500 with ESP32 or ESP32-S3 for Maker Ethernet Projects?
March 20, 2026Views 441
Comments 0
This article focuses on using an ESP32 with a W5500 Ethernet module under ESP-IDF, with emphasis on static IP setup,
How to Configure a Static-IP Ethernet Stack with W5500 on ESP32?
March 20, 2026Views 491
Comments 0
This project demonstrates how a microcontroller can send telemetry data to an MQTT broker over wired Ethernet using the WIZnet W5500 Ethernet controller.
How to Build an Ethernet-Based MQTT IoT Node with W5500 for Industrial Monitoring?
March 06, 2026Views 658
Comments 0
This article explains how a W5500-based embedded gateway controls a motor using MQTT communication over Ethernet.
How Can a W5500-Based Gateway Control a Motor Through MQTT?
March 06, 2026Views 593
Comments 0
This project demonstrates an Industrial IoT node built using the WIZnet W5500 Ethernet controller and an mKit development platform.
How to Build a Reliable Industrial IoT Node with W5500 and mKit over Ethernet?
February 27, 2026Views 340
Comments 0
This project integrates W5500 Ethernet with an mKit (MiOT Kit) platform to build a secure Smart Home device using SSL and mutual TLS authentication
How to Build a Secure Ethernet-Based Smart Home Device with W5500 and mTLS?
February 27, 2026Views 415
Comments 0
This article explains how to implement a TCP server using the WIZnet W5500 Ethernet controller in a DHCP-based network environment.
How Does a W5500 TCP Server Work with DHCP-Based Network Bring-Up?
February 06, 2026Views 454
Comments 0
This article introduces an industrial IoT product architecture built on the WIZnet W5500 Ethernet controller and the ESP32-S3-WROOM-1U-N16R8 module.
How Does a W5500 + ESP32-S3 PoE Module Become an Industrial IoT Product?
February 06, 2026Views 431
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?