Wiznet makers

ESP3D

Development of a standalone IoT vibration monitor

Neptune

Build a serverless, distributed smart home using WIZnet W5500 and Souliss. Achieve high reliability with a "Network is the Brain" architecture. No cloud needed!

SA5 links Snap! and Arduino via Firmata over TCP with a WIZnet W5100, enabling remote GPIO, PWM, servo, and I2C control on a LAN.

This project uses the WIZnet W5500 in MACRAW mode to build a USB-to-Ethernet storage bridge. A microcontroller appears as a USB flash drive to legacy TV

BetaFMS

Altium으로 설계한 W5500 Ethernet 모듈 DIY (2-Layer PCB + 3D 모델)

PlatformIO와 lwIP로 구현한 W5500 Ethernet Driver

ESP32-AIO-AG

OmniDriver

BTNqwe

.

If you want to add a simple oscilloscope, basic signal generation and spectrum analysis to your workbench, this inexpensive Network Connected Signal Analyzer (N

Wind controllers are fancy but expensive and their output signals have a too coarse resolution in time and their scope of application is too confined and they a

Meshtastic firmware powers off-grid LoRa mesh devices, while selected WIZnet-enabled boards add Ethernet services for API, time sync, and gateway-style roles.

RS_to_Ethenet

AGirs

SNMPAgent

CueB

ETH WIZ 3 click 870 projects

DryNoMore

A server-side Ethernet design uses a primary path, a standby path, and fault detection to reduce service interruption during link or switch failure.

HomeThread combines a Thread Border Router, Ethernet backhaul, and dashboard control for embedded home network management.