UCC

This project is PWM Voltage Control using Arduino Ethernet Shield.

이더넷 게이트웨이에 대한 직렬 포트는 직렬 포트의 데이터를 네트워크의 특정 서버의 특정 포트로 전달하여 장치의 원격 제어 및 데이터의 원격 전송을 실현할 수 있습니다.이제는 사람들의 생산에 널리 사용되었습니다.

W5300 Web Server 로 보드를 제어 할 수 있다.

a multi-purpose remote I/O (RIO) module for my DIY SCADA

A DIY smart home system the SCADA way...

a retrofit approach to make existing ball valves smart

W5100S-EVB-Pico IO board for Home Assistant via MQTT

Project for W5100S-EVB-Pico

Saber Wall Light using WizFi360-EVB-Pico

Flowerino + Arduino + Ethernet Shield: control lights in a room via browser or buttons

It is planned to use the Arduino Uno328P and serve it with an ethernet shield W5100 then all connect to a switch and router as a server

ESP32 DEV kit and PX1122R modules

MySX board for STM32F103C8T6 "Blue pill"

IFTTTButton

This is a library to provide Modbus client (formerly known as master), server (formerly slave) and bridge/gateway functionalities for Modbus

Higher education institutions should provide a high quality education, perform scientific and applied research, promote knowledge.

The system use full-function hardware protocol stack chip W5100 of Wiznet Company and RJ45 port which integrated network transformer

ping для Arduino UNO/Mega и Ethernet Shield W5100

This system in the electrical sector is commonly known as home automation or smart home, which is one of the most emblematic nowadays .

Arduino-compatible PLC CONTROLLINO, part 1

This tutorial is mainly to teach you how to start using Blynk and introduce a comprehensive introduction to each function of Blynk, made by

The MyDoorOpener project has attracted a surprisingly high number of enthusiasts over the years.

Arduino Uno R3 + W5100 send notification to LINE

Build a thermometer and hygrometer that costs a few crowns, displays both current and historical information, and sends a warning if the spe