Beware of multicast behavior of W5500

W5500 (manufactured by WIZnet), which I intend to use as an Ethernet HAT for Wio Terminal, has found that it is necessary to be careful when

WIZnet

Published November 16, 2022

Original author: https://www.windesign.work/ · JapanOriginal source (new tab)

Project description

Original : https://www.windesign.work/archives/1424#more-1424 Author : WinDesigns's Page Published On : 2020-11-01 The author decided to make a HAT of Wio Terminal. The Wio Terminal is a SAMD51-based microcontroller with Wireless Connectivity powered by Realtek RTL872DN that's compatible with Arduino and MicroPython. : Wio Terminal The author used WIZ550io. These are other articles. Prototype of Ethernet HAT for Wio Terminal WIZ550io conversion board for Wio Terminal The author describes the experience of using the multicast of W5500. W5500 UDP Function Multicast…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

TI DSP28377D + W5500 HW

Inverter + W5500

jaden

Views 28
Comments 0

ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what

How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch

irina

Views 34
Comments 0

Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b

CANary

Sunny_

Views 13
Comments 0

SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.

SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English

sophia

Views 31
Comments 0

A 600W USB-C PD power distribution system for 10-inch racks, featuring W5500-based Ethernet for remote monitoring and control.

HW_PDNode-600-Pro

Lihan__

Views 27
Comments 0

ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.

W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems

jakelee

Views 76
Comments 0

This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi

How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?

Arnold

Views 38
Comments 0