eth_w5500_v0.3_test
This project provides an example of setting up and testing a network connection using an ESP32 board and a W5500 Ethernet module.
0
Components
Hardware components
WIZnet - W5500
x 1
Espressif - ESP32S
x 1
Project description
Overview This example shows how to use the Ethernet driver with esp_netif. The Ethernet driver initialization is separated into its own component to make it clear. The process is as follows: Install the Ethernet driver. Attach the driver to esp_netif. Send DHCP requests and wait for an IP address. Once an IP address is obtained, you can ping the device. Use this example as a template for creating new Ethernet applications, such as connecting to an IoT cloud, and then add your own code. Hardware Required To run this example, it's recommended to use the official ESP32 Ethernet development…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
