How Can W5500 Give Eight Relays and Inputs a BACnet Management Interface?
JimBoHa turns a Waveshare ESP32-S3 W5500 relay board into a BACnet/IP node with priority-aware relays, signed OTA, a browser installer and a passed 24 h soak.
0
Components
Hardware components
WIZnet - W5500
Onboard Ethernet controller; ESP32-S3 SPI2 at 20 MHz, CS16, IRQ12, reset39. ESP-IDF Ethernet and lwIP carry BACnet/IP on UDP47808.
Project description
Eight Inputs and Eight Relay Commands on a Building Network JimBoHa's BACnet/IP firmware turns the Waveshare ESP32-S3-POE-ETH-8DI-8RO-C into an Ethernet-connected building-control node. The replacement application exposes eight digital inputs, eight relay commands and device health as BACnet objects. An ESP32-S3 runs the control and protocol software, while the onboard W5500 connects the controller to the Ethernet network. The Waveshare board itself is a commercial product sold with a factory application; JimBoHa's project replaces that application entirely. The independent GitHub repository…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.