Skip to content

How to Test Static-IP UDP Networking with WIZnet W5500 on ESP32 MicroPython?

This robotics-focused ESP32 MicroPython project tests a WIZnet W5500 Ethernet module with a direct cable connection to a PC using static IP settings.

ronpang

Published June 15, 2026

Original author: Groundwork ExplorerOriginal source (new tab)

How to Test Static-IP UDP Networking with WIZnet W5500 on ESP32 MicroPython?

Project description

How to Test Static-IP UDP Networking with WIZnet W5500 on ESP32 MicroPython? Summary This robotics-focused ESP32 MicroPython project tests a WIZnet W5500 Ethernet module with a direct cable connection to a PC using static IP settings. The ESP32 drives W5500 over SPI, disables DHCP for direct-link testing, manually writes IP/subnet/gateway/DNS values, binds the W5500 driver to a MicroPython socket abstraction, and sends UDP packets to a PC test program. W5500 provides the wired Ethernet interface, hardware TCP/IP stack, socket state machine, and packet buffering needed for deterministic…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like