A remote SDR receiver using RP2350, W6300, and PoE to control an RTL-SDR over Ethernet and stream I/Q data to GQRX through rtl_tcp.
adsb-rp2350-rtltcp : PoE Remote SDR Receiver with WIZnet W6300
lawrence
Views 24

Comments 0
Hardwired TCP/IP Ethernet controller chip with IPv4 and IPv6 support.
17 projects
A remote SDR receiver using RP2350, W6300, and PoE to control an RTL-SDR over Ethernet and stream I/Q data to GQRX through rtl_tcp.
adsb-rp2350-rtltcp : PoE Remote SDR Receiver with WIZnet W6300
lawrenceViews 24
Comments 0
UnreaLin01's mlx90640-rp2350-stream reads an MLX90640 thermal array on a WIZnet W6300-EVB-Pico2 and ships raw sensor data to a PC over USB or UDP.
mlx90640-rp2350-stream
TheoImViews 447
Comments 0
Native ethernet: config for WIZnet W6100 SPI and W6300 PIO QSPI on RP2040/RP2350, merged by Home Assistant developer bdraco and shipped in ESPHome 2026.4.0.
What Does ESPHome Support for W6100 and W6300 Ethernet Add on RP2040 and RP2350?
BenjaminViews 137
Comments 0
STM32H5-W6300 (Hygenis Board) Firmware OTA and Web Server Bootloader Project
STM32H5-W6300 - Firmware OTA & WebServer
TheoImViews 126
Comments 0
WebSocket on a WIZnet ESP SoM. TCP runs on the Ethernet chip, not the MCU. Same firmware on W5500 or W6300 - one menuconfig switch, no porting.
WebSocket on the WIZnet ESP SoM: the MCU never runs TCP
TheoImViews 332
Comments 0
Modbus TCP slave plus a live web dashboard on a WIZnet ESP SoM. Change the IP from the browser. Same firmware on W5500 or W6300, one menuconfig switch.
Modbus TCP on the WIZnet ESP SoM, re-addressable from a browser
TheoImViews 326
Comments 0
One ESP32-S3 streams the same camera over Ethernet (hardware TCP/IP) and Wi-Fi at once. Pull the cable and the surviving link gets 3x faster. Here is why.
ESP32-WIZnet Chip-DevKit Camera Streaming
TheoImViews 317
Comments 0
Waveshare's RP2350-POE-ETH pairs the dual-core RP2350A with WIZnet's W6300 hardwired TCP/IP controller and an onboard RJ45, with optional 802.3af PoE.
Waveshare RP2350-POE-ETH: RP2350A + WIZnet W6300 Ethernet Board with Optional PoE
ElenaLeeViews 169
Comments 0
A Wake-on-LAN sender on the W6300-EVB-Pico (RP2040 + WIZnet W6300): a UDP Magic Packet over wired Ethernet powers on a PC remotely.
How to Wake a PC with Wake-on-LAN from a W6300-EVB-Pico (RP2040 + WIZnet W6300)
BenjaminViews 497
Comments 0
In a robot system where multiple control boards share a CAN-FD bus, this board lets you update every board's firmware over a single network link. The entire wir
bridge-writer
lawrenceViews 428
Comments 0
https://github.com/TeeJaa1989/stm32g431_nucleo
stm32g431_nucleo
TheoImViews 173
Comments 0
Use W6300 to expose an STM32H5 UART CLI over Ethernet. Connect via Telnet and manage the device remotely without a serial cable.
STM32H5-W6300 - Telnet CLI
TheoImViews 295
Comments 0
W6300 Low level Link speed tes
W6300 Low level Link speed test
sophiaViews 229
Comments 0
Swiss is an all-in-one homebrew utility for the Nintendo GameCube. Originally initiated by emu_kidid and currently actively maintained by Extrems
utility for the Nintendo GameCube: Swiss
lawrenceViews 521
Comments 0
Embassy’s embassy-net-wiznet just gained an initial WIZnet W6300 chip driver in Rust, enabling Embassy applications to talk to the newest 10/100 TOE controller
How to Get W6300 Hardware TCP/IP Running in Rust Embassy?
viktorViews 2386
Comments 0
Zephyr 워크스페이스 밖에서 RP2350+W6300 이더넷 보드를 빌드·패키징하는 실전 템플릿. 커스텀 보드/드라이버/설정을 한 프로젝트로 묶어 “재현 가능한 빌드”를 만든다.
oss-ethw6300 — Zephyr External App Blueprint for RP2350 + W6300
sophiaViews 238
Comments 0
'Zero Energy Export' solution, powered by WIZnet's W6300, to solve the solar reverse power problem by actively controlling the inverter output.
WIZnet Success Stories : RIPOWER Co.,Ltd | Zero Energy Export
lawrenceViews 542
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?