Skip to content

STM32H5-W6300 - Telnet CLI

Use W6300 to expose an STM32H5 UART CLI over Ethernet. Connect via Telnet and manage the device remotely without a serial cable.

TheoIm

Published June 08, 2026

Original author: baram · South KoreaOriginal source (new tab)

STM32H5-W6300 - Telnet CLI

Components

Hardware components

WIZnet parts

Project description

What the Project Does The project solves a common embedded debugging problem: a CLI is useful during development and maintenance, but UART and USB require physical access to the board. By adding Telnet, the CLI becomes reachable over the local network. A typical use case is a device installed inside a machine, enclosure, test rack, factory line, or remote lab bench. Instead of opening the case and attaching a serial cable, the user connects over Ethernet and checks logs, runs diagnostic commands, reads network status, or changes configuration. The system sequence is straightforward: 1…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like