Skip to content

ESP32-S3 CCTV Camera — IoT Surveillance Camera Firmware with W5500 Ethernet Support

An ESP32-S3 CCTV/IoT firmware combining W5500 Ethernet, motion detection, SD recording, MQTT, and a web UI for wired LAN camera nodes.

matthew

Published April 15, 2026

Original author: karpus2807Original source (new tab)

ESP32-S3 CCTV Camera — IoT Surveillance Camera Firmware with W5500 Ethernet Support

Project description

Recommended Components WIZnet W5500 ESP32-S3-WROOM-1U-N16R8 OV3660 Camera MicroSD / TF Card DHT11 PIR Sensor MQTT / ThingsBoard Arduino ESP32 Core Web UI / HTTP Server PROJECT DESCRIPTION 📌 Overview This project is firmware that turns an ESP32-S3 camera board into a compact CCTV / IoT surveillance device. It is not just a simple camera streaming example. It combines W5500 Ethernet, Wi-Fi configuration, SD card recording, motion detection, MQTT telemetry, a web-based control UI, and time synchronization. The v3 release notes list MQTT on/off control, camera motion detection, LAN/time sync…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like