OnStepX-Configurator

A browser-based tool for configuring, compiling, and flashing OnStepX telescope firmware, including W5100/W5500 Ethernet options for SmartWebServer.

matthew

Published April 23, 2026

166 UCC

Original author: christm45Original source (new tab)

Project description

OnStepX Configurator — Web-Based Telescope Controller Firmware Builder with W5100/W5500 Ethernet Support Recommended Components WIZnet W5500 WIZnet W5100 ESP32 / ESP8266 Teensy 3.2 / 4.0 / 4.1 STM32 BlackPill F411 STM32F407 / BTT SKR PRO STM32F446 / FYSETC S6 OnStepX SmartHandController SmartWebServer PROJECT DESCRIPTION 📌 Overview OnStepX-Configurator is a web-based configuration, build, and flashing tool for telescope mount controller firmware. Normally, using OnStepX requires installing Arduino IDE or PlatformIO, downloading the source code, editing Config.h, building the firmware, and…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what

How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch

irina

Views 36
Comments 0

Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b

CANary

Sunny_

Views 16
Comments 0

SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.

SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English

sophia

Views 33
Comments 0

A 600W USB-C PD power distribution system for 10-inch racks, featuring W5500-based Ethernet for remote monitoring and control.

HW_PDNode-600-Pro

Lihan__

Views 30
Comments 0

ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.

W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems

jakelee

Views 129
Comments 0

This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi

How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?

Arnold

Views 39
Comments 0

This project uses an STM32 microcontroller with the WIZnet W5500 to provide wired 10/100 Ethernet connectivity through SPI.

How to Build a PROFINET-Oriented STM32 Ethernet Device with W5500?

mark

Views 43
Comments 0