STM32(HAL library) + W5500
STM32(HAL library) + W5500
0
Project description
1.It should be noted that the resistors R12~R17 are for mode selection, and which ones to weld are selected according to actual needs. 2.SPI interface for MCU & W5500, plus the INT and RST pins, occupying a total of 6 IOs, of which the INT pin can be used, and RST generally needs to be connected. SW Part: https://github.com/Wiznet/ioLibrary_Driver SPI setting: Add socket.c , wizchip_conf.c & W5500.c in the project: SPI initialization:
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
