Particle Ethernet Featherwing
Based on the WIZnet W5500 chip, this side-by-side FeatherWing maintains great RF performance
3
Based on the WIZnet W5500 chip, this side-by-side FeatherWing maintains great RF performance
3
Building a PoE Voice and Presence Satellite for Home Assistant with W5500
Home Assistant PoE Voice & Presence Satellite
sophiaViews 71
Comments 0
ESPHome AwoX BLE Mesh Hub connects AwoX/EGLO devices to Home Assistant using ESP32-S3 BLE Mesh and W5500 Ethernet for MQTT connectivity.
EspHome-AwoX-BLE-mesh-hub
irinaViews 48
Comments 0
HCV Ethernet Edition: A CAN-to-MQTT Adapter for Viessmann Heat Pumps Using ESP32 and W5500
HCV Ethernet Edition: A CAN-to-MQTT Adapter for Viessmann Heat Pumps Using ESP32 and W5500
Aimee0Views 44
Comments 0
ESPHome firmware for an ESP32-S3 + W5500 + LD2450 sensor that tracks up to three targets in polygon zones and reports to Home Assistant over wired Ethernet.
Sensy-One E1: Wired-Ethernet mmWave Presence Sensor for Home Assistant on ESP32-S3 and W5500
josephsrViews 91
Comments 0
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System Using ESP32-S3 and W5500
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System
Aimee0Views 47
Comments 0
WittelB turns Modbus RS485 devices into Ethernet endpoints with W5500, DIN-rail packaging and a local interface for configuration and register checks.
How Does WittelB WIN-CN-1M-1TCP Use W5500 to Connect Modbus RS485 Devices?
BenjaminViews 37
Comments 0
KinCony AIO Hybrid combines W5500 Ethernet, five manual relay overrides, analog I/O and Tuya interfaces, with current KCS firmware and ESPHome examples.
How Does W5500 Connect the KinCony AIO Hybrid to a Mixed Home Automation System?
BenjaminViews 33
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?