W5500 Nano V3 Ethernet network shield active/passive PoE module for use with Arduino Nano
RobotDynNano ETH W5500 is a full-featured Ethernet connected device over LAN
3
Similar projects you might like
TI DSP28377D + W5500 HW
Inverter + W5500
jaden-
Views 28
-
Comments 0
ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what
How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch
irina-
Views 34
-
Comments 0
Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b
CANary
Sunny_-
Views 14
-
Comments 0
SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.
SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English
sophia-
Views 31
-
Comments 0
A 600W USB-C PD power distribution system for 10-inch racks, featuring W5500-based Ethernet for remote monitoring and control.
HW_PDNode-600-Pro
Lihan__-
Views 28
-
Comments 0
ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.
W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems
jakelee-
Views 93
-
Comments 0
This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi
How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?
Arnold-
Views 38
-
Comments 0