Wired Sub-vendo Setup
Setting up wired subvendo using Arduino Nano and W5500 wired ethernet module.
3
Project description
Similar projects you might like
ESP-WiFiWatch passively scans neighbors' Wi-Fi for sudden outages while WIZnet's W5500 Ethernet handles all management, keeping the monitor independent of what
How Do You Detect a Power Outage by Listening to Your Neighbors' Wi-Fi? - WifiWatch
irina-
Views 36
-
Comments 0
Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b
CANary
Sunny_-
Views 16
-
Comments 0
SqueezeAMP PoE is an amplifier driven by an ESP32 designed to run squeezelite-esp32, powered by PoE++.
SqueezeAMP PoE: ESP32 Network Audio Amplifier with W5500 Ethernet and PoE++ English
sophia-
Views 33
-
Comments 0
A 600W USB-C PD power distribution system for 10-inch racks, featuring W5500-based Ethernet for remote monitoring and control.
HW_PDNode-600-Pro
Lihan__-
Views 30
-
Comments 0
ESP32-S3 + W5500 connects TDT-1001 LiFePO4 BMS data to ESPHome and Home Assistant, including multi-pack monitoring over one RS-232 link.
W5500 Brings Wired ESPHome Monitoring to Multi-Pack LiFePO4 Battery Systems
jakelee-
Views 129
-
Comments 0
This project targets an embedded machine-vision architecture in which an OV2640 camera captures image data and an MCU forwards that data over wired Ethernet usi
How to Capture OV2640 Images and Transport Them over Ethernet with W5500 for Machine Vision?
Arnold-
Views 39
-
Comments 0
This project uses an STM32 microcontroller with the WIZnet W5500 to provide wired 10/100 Ethernet connectivity through SPI.
How to Build a PROFINET-Oriented STM32 Ethernet Device with W5500?
mark-
Views 43
-
Comments 0