esp-eth-drivers

https://github.com/espressif/esp-eth-drivers.git

Grace_Koo

Published September 25, 2025

112 UCC

25 WCC

11 VAR

Original source (new tab)

Components

Hardware components

WIZnet - W5500

x 1

WIZnet parts

W5500 Datasheet

Project description

ESP-IDF Adds Official Support for W5500 — SPI Ethernet Is Now Part of the Standard Ethernet Driver Espressif has officially added support for the WIZnet W5500 Ethernet controller in ESP-IDF. With the new esp-eth-drivers and the espressif/w5500 component, ESP32 can now use SPI-based Ethernet seamlessly through the standard Ethernet API. 🔗 Official Links GitHub: esp-eth-drivers Component Registry: espressif/w5500 1.0.0 1. Official Component Integration Espressif has published the W5500 driver as an official component under the name espressif/w5500. It can be added to an ESP-IDF project with a…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

Ooznest board support in grblHAL/ESP32 routes Telnet, WebSocket, FTP and WebUI over a W5500 SPI Ethernet link on the ESP32-S3, with Wi-Fi compiled alongside.

Why Did CNC Vendor Ooznest Choose W5500 Ethernet for Its grblHAL ESP32-S3 Board?

Benjamin

Views 117
Comments 0

Surat factory WiFi is unreliable, so the EaseEmbro MES gives its ESP32-S3 fingerprint terminal a W5500 wired Ethernet option. The platform runs 33 factories.

Why Did EaseEmbro Put a W5500 Wired Option in Its ESP32-S3 Attendance Terminal?

Benjamin

Views 94
Comments 0

A peer-reviewed 2026 paper wires an ESP32, three PZEM-004T sensors, and a W5500 Ethernet module into the BMKG Sleman station LAN to log 3-phase kWh in MySQL.

How Does a W5500 Wired ESP32 Monitor 3-Phase Power at a BMKG Geophysics Station?

Benjamin

Views 89
Comments 0

Five: Modbus TCP, S7, PROFINET DCP, OPC UA and EtherNet/IP. This ESP32-S3 firmware runs the W5500 in promiscuous mode to read Layer 2 frames.

Which Industrial Protocols Can a W5500 and ESP32-S3 Detect on an OT Network?

Benjamin

Views 160
Comments 0

In this open KiCad gateway an ADIN1110 holds the 10BASE-T1L pair and a W5500 carries it onto standard Ethernet, both on one ESP32-S3 over separate SPI buses.

How Does a 10BASE-T1L Field Port Reach Standard Ethernet Through a W5500?

Benjamin

Views 97
Comments 0

ULSTU put a W5500 on the ESP32 board of its Ackermann teaching robot, so a Jetson AGX Xavier sends JSON-RPC drive commands and reads IMU data over wired UDP.

Why Does a W5500 Ethernet Link Carry ROS 2 Drive Commands in the ULSTU Buggy?

Benjamin

Views 132
Comments 0

hexinttp's ESP-IDF firmware maps Modbus RTU and TCP registers to named points, publishes them over MQTT, and serves 11 MCP tools, with W5500 as default route.

How Does an ESP32-S3 Modbus Gateway Serve Field Points as MCP Tools over W5500 Ethernet?

Benjamin

Views 219
Comments 0