https://github.com/nandibrenna/Beremiz4uC
Beremiz4uC
September 03, 2026
Views 86

Comments 0
https://github.com/nandibrenna/Beremiz4uC
Beremiz4uC
September 03, 2026Views 86
Comments 0
https://github.com/DenysMedvid/small-weather-station
small-weather-station
September 03, 2026Views 80
Comments 0
Zephyr's in-tree W5500 driver is MACRAW only. This repo adds an out-of-tree socket-offload driver on the chip's hardware TCP/IP.
How Does a Zephyr Driver Use W5500 Hardware TCP/IP When the In-Tree One Is MACRAW Only?
September 03, 2026Views 112
Comments 0
Wired MQTT escape-room control on W5500-EVB-Pico2, using the WIZnet MicroPython build whose release ships both LWIP and TOE images.
Why Does an Escape Room Run Its W5500 Boards on MicroPython?
September 03, 2026Views 88
Comments 0
https://github.com/mchristegh/sam-bridge
sam-bridge
September 03, 2026Views 76
Comments 0
https://github.com/stanelie/gaytencoder
gaytencoder
September 03, 2026Views 73
Comments 0
Four UDP echo builds on one NUCLEO-H723ZG, measured for an hour each: W5500 hardware offload against MACRAW and the STM32's own MAC.
How Much Does W5500 Hardware Offload Save Over MACRAW on the Same Board?
September 03, 2026Views 105
Comments 0
One industrial gateway written in C and again in Rust on the same STM32F407 and W5500, reconciled by the same 93-test e2e suite.
How Do You Prove a Rust Rewrite Matches the C Firmware It Replaces?
September 03, 2026Views 97
Comments 0
SSH Stamp turns W6300-EVB-Pico2 into a secure UART bridge and improves MACRAW reliability for Embassy.
SSH Stamp: Secure Remote UART Access with W6300-EVB-Pico2
August 19, 2026Views 122
Comments 0
Beryllium OS Micro treats W5500 as a CircuitPython OS network driver, enabling modular wired Ethernet on small MCUs.
Beryllium OS Micro: A Modular CircuitPython Environment with W5500 Ethernet
August 19, 2026Views 110
Comments 0
https://patents.google.com/patent/CN105207869A/zh
CN105207869A
August 18, 2026Views 97
Comments 0
Particle's Device OS registers the W5500 as an lwIP netif: Socket 0 in MACRAW, the full 16 KB buffer, and pins configurable at runtime.
particle-iot /device-os
August 18, 2026Views 141
Comments 0
Zephyr + WAMR OS running sandboxed .wasm apps on MCUs. On STM32U585 the W5500 in MACRAW mode is the sole network path for app upload, OTA, WebSocket and mDNS.
AkiraOS
August 12, 2026Views 167
Comments 0
Raspberry Pi Pico + W5500-Lite four-universe Art-Net-to-DMX512 node, using the W5500 hardware socket for UDP and web config.
FM-ArtNetNode_4U_V2
July 31, 2026Views 191
Comments 0
https://github.com/Tommie1236/pico-art-net-node
pico-art-net-node
July 31, 2026Views 134
Comments 0
https://github.com/claireAnot/3D_Projet
3D_Projet
July 31, 2026Views 142
Comments 0
https://www.doityourselfchristmas.com/forum/index.php
doityourselfchristmas
July 31, 2026Views 135
Comments 0
An Art-Net·USB → DMX512 lighting interface on STM32 + WIZ850io (W5500), using the W5500 hardware UDP socket directly and supporting MIDI, ASCII, and MiniDMX.
STM32 based USB (+ Art-Net) to DMX512 Interfaces
July 31, 2026Views 166
Comments 0
https://github.com/adeboni/math-camp-synth
math-camp-synth
July 23, 2026Views 102
Comments 0
https://github.com/FlipEngineering/nailsteppers
nailsteppers
July 23, 2026Views 98
Comments 0
How to configure Espressif's open-source Thread Border Router SDK with a W5500 wired Ethernet backbone.
esp-thread-br
July 23, 2026Views 123
Comments 0
An Art-Net → DMX512 lighting gateway on STM32F411 + W5500, driving the W5500's hardware UDP socket directly and optimized for low latency with SPI/TIM DMA.
stm32_artnet_dmx
July 22, 2026Views 156
Comments 0
A lab simulator that reproduces atmospheric turbulence for free-space optical links, receiving channel data via W5300 hardware TCP/IP.
Design and Experimental Demonstration of an Atmospheric Turbulence Simulation System for Free-Space
July 15, 2026Views 142
Comments 0
https://github.com/andeedotnet/ESP32-S3-ETH-8DI-8RO-firmware
ESP32-S3-ETH-8DI-8RO-firmware
July 14, 2026Views 128
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?